Front bumper bolts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Musicmaker

Musicmaker

Active Member
Posts
346
Location
Glasgow, Scotland
Whilst changing the Air Con belt, I noticed the two bolts are missing from below the front bumper. Does anybody know the exact size? so that I can get some from the tool store tomorrow I'm thinking that they might be 9mm as I tried 8 and 10 mm bolts. Am I right in thinking that 9mm is an odd size?
 
I replaced mine on the rear bumper with some M10 stainless steel flange head bolts from eBay.

Mine were so corroded I had to drill and cut them out, it was a nightmare. I ended up having to replace one of the bumper mounts too.

I'm hoping the stainless will help if I ever need to remove them in the future, plus they're cheap and hex head, so you don't need the Torx socket to fit them!

http://www.ebay.co.uk/itm/M10-X-30-..._Material_Nails_Fixing_MJ&hash=item1c28f9e6c9
 
+1 on stainless I try and change as many as I can if I take things apart as I have a nice collection of stainless nuts bolts& washers
 
Please be aware that standard stainless bolts are nothing like as strong as alloy steel bolts and will not take the torque load or be a strong in tension and shear as the equivalent bolt made from alloy steel. Most fasteners used on cars are at least 8-8 alloy steel. Standard stainless does not meet this spec. So don't fit them in stress areas.
 
I only use the stainless on none stress items wouldn't dream off using then on important areas ,most of my bolts are 8.8 stainless came from dennis buses
 
You must log in or register to reply here.

Similar threads

B
Rear bumper choices
Replies
7
Views
562
BigJessie
B
seldom
2011 to 2009 Front
Replies
2
Views
246
seldom
seldom
R
Lashing rings
Replies
2
Views
379
rubix101
R
A
P38A Head Gasket Kit & ARP Bolts ?
2
Replies
23
Views
882
enjoi
enjoi
Spencer R
Discovery 1 300tdi Auto with air con - Winch bumper?
Replies
3
Views
567
discool
discool
Back
Top