P38A Front Brake Piston Hell

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Enuff

Enuff

Well-Known Member
Posts
967
Location
This side of there..
As the title suggests, i am having a nightmare refitting the front brake caliper pistons back in without trashing the new seals.
I have refurbed the lot and need to ask if any one has a idiot proof way of getting the pistons back in, straight, with only a large engineers vice, some red grease and a half drunk bottle of Merlot...(which will help with my internet research into this subject and then probably some porn research)

I have done many 'Normal' cars and motorcycles but these seem to be cursed.
What method has worked for you ?? on the brakes, not porn.
 
I just push them in with my thumbs?
Fit inner seal then lubed piston ( just brake fluid) then wiper seal/ metal ring pre assembled over the piston, tapped home with a suitable piece of tube.
Britpart kits- no problem.
 
Bloody things, getting the polished and lubed piston past the bottom fluid seal is not a problem..
Fitting the top dust seal into the caliper groove 1st, fitting the piston shears it off,
Fitting dust seal into piston groove first, then can't get to the caliper groove to press in seal without damaging it.
Am I missing a special, expensive p38 tool. Seals never been this crappy to do before.
Any pointers before I fire up the propane melting pot.
 
Enuff said:
Bloody things, getting the polished and lubed piston past the bottom fluid seal is not a problem..
Fitting the top dust seal into the caliper groove 1st, fitting the piston shears it off,
Fitting dust seal into piston groove first, then can't get to the caliper groove to press in seal without damaging it.
Am I missing a special, expensive p38 tool. Seals never been this crappy to do before.
Any pointers before I fire up the propane melting pot.
Click to expand...

Is Flossie nearby?!
 
'ang on, I may be talking nuts...just realised you're talking p38, I was thinking Defenders- sorry. I've no idea what the seals are like on them.
However...see if you can source the inner seals , assuming the callipers split, and just split them.
Put a pic up?
 
You know that warm feeling of satisfaction when you achieve whatever goal your aiming for..
I had it briefly with a moment of realisation that fitting new seals and sliding the piston with ease into the caliper, can be done in about 15 seconds each.
Well done to land rover, they put a bit of thought into the brakes on the p38.
Couldn't find anything on rave, but there's 3 seals per piston, fit bottom one, only half fit top one, fit middle one, ease piston in, top one plops into place. Logical.
Easy when you know how. Oh and thanks for sharing......yes you.
 
Enuff said:
You know that warm feeling of satisfaction when you achieve whatever goal your aiming for..
I had it briefly with a moment of realisation that fitting new seals and sliding the piston with ease into the caliper, can be done in about 15 seconds each.
Well done to land rover, they put a bit of thought into the brakes on the p38.
Couldn't find anything on rave, but there's 3 seals per piston, fit bottom one, only half fit top one, fit middle one, ease piston in, top one plops into place. Logical.
Easy when you know how. Oh and thanks for sharing......yes you.
Click to expand...

That's a bl**dy good tip. I've still got my old ones in the shed awaiting refurbishment.
 
You must log in or register to reply here.

Similar threads

damian46
Brake pads not fitting
Replies
13
Views
1K
damian46
damian46
dag019
Brake caliper piston replacement
Replies
3
Views
1K
dag019
dag019
M
Freelander 1 Brake Piston Rewind Tool
Replies
13
Views
2K
mbrokof
M
dag019
Brake caliper issues
Replies
7
Views
1K
dag019
dag019
scottonthefen
New front drum brakes binding in reverse
2
Replies
26
Views
3K
nickjaxe
N
Back
Top