Freelander problem

stephb86 · Oct 21, 2013

Hello

Im after abit if advice to diagnose my freelander problem.

I have to start my freelander with the clutch pressed in. I cannot select a gear and its as if the clutch is holding one of the gears.

Is this a gearbox fault or clutch fault?

Any advice would be helpful

thanks

S.Broatch

SES88 · Oct 21, 2013

Clutch slave bearing maybe, knackered hydraulics, knackered flywheel or knackered clutch...one of them. Either one will involve at least a new clutch, but doing the rest at the same time is recommended.

Epicuser · Oct 21, 2013

stephb86 said:
I have to start my freelander with the clutch pressed in.

This normal on many new cars, but alas not on a Freelander 1....

Spacemonkey... · Oct 21, 2013

If you can still do clutchless changes by matching the revs then that would point to a clutch slave problem IMO.

Freelaner · Oct 21, 2013

sounds like a gearbox fault to me

have you seen the "introduce yourself" section?

dasgas · Oct 22, 2013

how long have you had the car

is the clutch pedal very big

this sounds like a automatic

kev1nlm · Oct 22, 2013

it sounds like it could be a hydraulic fault, can you take it out of gear with the engine switched off?

Freelander problem

stephb86

New Member

SES88

Well-Known Member

Epicuser

Ex Freelander Owner

Spacemonkey...

Well-Known Member

Freelaner

Landy Driver

dasgas

New Member

kev1nlm

Active Member

Similar threads