Freelander Light Bar for Roof

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
LandySurf

LandySurf

Active Member
Posts
164
Location
London / Cornwall
Freelander Light Bar for Roof

Hey All :whoosh:
Still doing some mods for my Freelander, and at the moment trying to track down one of these light bars ( see attached pic ) mounts on the roof, and you can attach spot lights to it

Searched flebay, can't seem to find one, trailed the net, no luck. Read various forum posts on here, that most people seem to fit these types of spot lights, to expedition racks etc, but I like the idea of a single light bar like the one pictured, that you can just attach. :bump2:

Companies seem to make these bars for disco's, defenders etc, but not for the freebie! Anyone got any ideas of where they've seen one? Or if they have one that they don't want... any help as always, would be much appreciated.

Thanks again - your all wonderful as always :high5:

Landy
 

Attachments

  • ImageUploadedByTapatalk1352924523.276106.jpg
    ImageUploadedByTapatalk1352924523.276106.jpg
    116.1 KB · Views: 7,337
that looks like a home made one the ones that they used to sell go under the roof bars ,you take the bolts out and then put the bar in and bolts back in.
 
Hey Teddy
Yeah i thought as much! I like the design though! - 2 Questions for you -
1) Have you seen anything like this which would hold some spot lights?
2) I need one of your CB Aerial mounts in black shortly :)

Landy
 
Hey TD4
This ( attached pic ) from that post, is exactly the type i'm after..........
Exactly like this....
It's just a case of where to get one!!! Hmmmmmmmmmmmm!! :confused:
( The prototype in blue the other chaps done, is interesting, but sits a little high, and stands out being in silver )
The one on the red freebie, sits lower, and i think suits the truck v.well!

I think if there is going to be a light bar on the roof, it needs to look like it's always been there, the black metal suits it, and it's hidden well behind whatever lights you'd put up there. I suppose you can always angle your lights to wherever you need them!

Just a case of where to pick one up I suppose!!
 

Attachments

  • 8696A895-6250-42D8-8EFA-54D13D6AA733_zpsydgxhcwl.jpg
    8696A895-6250-42D8-8EFA-54D13D6AA733_zpsydgxhcwl.jpg
    125.7 KB · Views: 4,456
Last edited:
LandySurf said:
Hey TD4
This ( attached pic ) from that post, is exactly the type i'm after..........
Exactly like this....
It's just a case of where to get one!!! Hmmmmmmmmmmmm!! :confused:
( The prototype in blue the other chaps done, is interesting, but sits a little high, and stands out being in silver )
The one on the red freebie, sits lower, and i think is very smart!!

I think if there is going to be a light bar on the roof, it needs to look like it's always been there, the black metal suits it, and it's hidden well behind whatever lights you'd put up there. I suppose you can always angle your lights to wherever you need them!

Just a case of where to pick one up I suppose!!
Click to expand...

It ain't red.... Until you apologise for mistaking kinversand bronze for red I ain't tell in ya nuffin.....
 
Yup it's knocked up outta some scrap and a light bar relived from the front of a sj that was home made in the first place! I am currently revamping it and intending to change to round lamps.

The rectangular lamps were sitting too far forward and the beam pattern was throwing loads of stray light down into the windscreen and reflecting off the dash.

I have shortened the side sections to bring it back and I am re shaping the side plates. I am also going to use thicker plates that are tapped out instead of using seperate nuts and bolts.
ydaru4y3.jpg

I will post some more pictures when I have got further along with the mods.
 
ZDomZ
Thanks for the post above. That's really interesting! Great job though so far! From what I've read on the forums, it looks like alot of people who have got a light bar like this, have made it themselves
It does look really good what you've done, so it's given me some good ideas! Yeah please do, post up some pics when it's all done, would be really good to see!

That's one of the main things i'm toying with at the moment!
Wether to put rectangular spots ( like yours ) onto the frame.... ( this kind below )

6 Light Roof bar Spot Lamps/Guards Defender/Discovery | eBay

Or wether to keep them to circular ones!
I'm putting on a bull bar at the moment, and they come with circular Safari 3000' Lights! ( I'll attach a pic at the bottom )

Only thing I'm thinking, is would it look strange to have circular Safari lights on the bull bar, and then rectangular lights on the light frame at the top? Would it look strange as a mixture of circular and rectangle? :confused:

Or if they are all Safari style circular lights - would it look like ALOT going on at the front! ( as the rectangular ones do tend to look like they ''blend in'' in a little more ) ....

Difficult one........
 

Attachments

  • 6959878618_95d41c62f3.jpg
    6959878618_95d41c62f3.jpg
    53.7 KB · Views: 3,793
Last edited:
Ses88 is looking at making g4 style bars so that is another option. I like the rectangular light shape but as I said they give out waste light. The two reasons I am changing to round is for a better beam pattern an also cuz the missus doesn't like the rectangular ones! I prefer it when she has one less thing to moan about!

I also think that now I have my bar on the front with the round spots and the sort of round fogs in the bumper that it needs round on the roof.
 
You must log in or register to reply here.

Similar threads

P
Wiring for Tow Bar
Replies
1
Views
162
Nodge68
Nodge68
H
Freelander 2 2013 door locking
Replies
3
Views
260
Freddie17
Freddie17
tweedandbriar
Base for Roof Rack
Replies
5
Views
310
dag019
dag019
Lex Myster
Freelander 2 - Roof cage
Replies
2
Views
501
Lex Myster
Lex Myster
Stance
License plate light
Replies
7
Views
513
Stance
Stance
Back
Top