Freelander Heater Matrix
- Thread starter steq184
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
am not sure but i think its a dash out job, which not the most cerebally challenging job is very time consuming. allow yer self a day to do it ..unless some else knows betta
- Posts
- 83,236
- Location
- Embasinga stocæ
nope - yu are spot on, Slob its a dash removal jobby - I think stealers reckon on 8 hours! - thats about £700 plus parts
LR GUY
New Member
- Posts
- 356
nope - yu are spot on, Slob its a dash removal jobby - I think stealers reckon on 8 hours! - thats about £700 plus parts
think your scaring ppl there mhm you get about 2.7hours to remove and refit a facia on frelander and about 3.5 to do the matrix
cashybai
New Member
- Posts
- 662
- Location
- Roootland, t'midlands
think your scaring ppl there mhm you get about 2.7hours to remove and refit a facia on frelander and about 3.5 to do the matrix
Plus 1.5 hrs for lunch, and another two to do the invoice......
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
think your scaring ppl there mhm you get about 2.7hours to remove and refit a facia on frelander and about 3.5 to do the matrix
is that the times fer a egg spurt or a spanner virgin?
mickobrien
Active Member
- Posts
- 297
- Location
- "Sunny Blackpool"
i did one for a mate on a montego.... what a twastard of a job.... i i knew it wouldov taken more or less a whole day id have passed on that one. the heatmatix side of its a doddle. is just the dash screws everyware.
if only no more nails were around then.... no more screws
if only no more nails were around then.... no more screws
LR GUY
New Member
- Posts
- 356
granted you not gonna do it in that time 1st time round but lettin you know it dont cost 8 hours labour in a dealer
Done me matrix today, took 5 hours all in.
The only problem I have at the moment is that the matrix obviously needs bleeding because when you rev the car while stopped you can hear the water gurgling in the matrix, when I filled up the water I made sure that I bled using the little plastic screw on the top hose into the bulkhead to the matrix.
Is there another way to bleed as the water gurgling is a little annoying!!
The only problem I have at the moment is that the matrix obviously needs bleeding because when you rev the car while stopped you can hear the water gurgling in the matrix, when I filled up the water I made sure that I bled using the little plastic screw on the top hose into the bulkhead to the matrix.
Is there another way to bleed as the water gurgling is a little annoying!!
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
just turn the radio up
Similar threads
Freelander 2 (LR2)
Turbo coolant return pipe
