G13SJC
New Member
- Posts
- 735
- Location
- Nuneaton, Warwickshire
Rear diff front mount perished (Replaced all three)
Bought with HGF (no compression) rebuilt with latest gasket and oil rail
O/S CDL motor packed up, tried cleaning but ended up replacing (£64ish)
1 rear wheel bearing noisy (both rears replaced )
Clutch slave cylinder bracket snapped (Replaced for £6 or £9)
HDC failed (wire fell off microswitch terminal) (soldered and fixed for free)
Considering mileage (bought at 98K for £550) has not cost much at all to put right.
Freelander wheelbase is 100" according to my tape measure if anything major goes I may consider a body swap onto a RRC rolling chassis!!
Bought with HGF (no compression) rebuilt with latest gasket and oil rail
O/S CDL motor packed up, tried cleaning but ended up replacing (£64ish)
1 rear wheel bearing noisy (both rears replaced )
Clutch slave cylinder bracket snapped (Replaced for £6 or £9)
HDC failed (wire fell off microswitch terminal) (soldered and fixed for free)
Considering mileage (bought at 98K for £550) has not cost much at all to put right.
Freelander wheelbase is 100" according to my tape measure if anything major goes I may consider a body swap onto a RRC rolling chassis!!