Freelander Bumbers back to Black ??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
reeflodge said:
Peanut butter won't dye the bumber from grey to black though
Click to expand...

if it wasn't originally grey then of course it won't but it'll do a much better job of turning a grey looking (originally black) water/sun faded black bumper back to looking original far better than any of those "back to black" products mentioned above
 
Clean and polish the car first - I use Autoglym products

The polish that gets on the pastic trim leaves white marks.
These are easily removed using Silicone Spray (from Halfrauds)

The same Silicone spray - sprayed onto a lint free rag - then brings the plastic up to a luverly finish.

Even the Grey bumpers look good after this.
 
if there grey there grey and thats it but a very good product is wurth buumper gel all the main merc garges use it and its great stuff
 
reeflodge said:
My freelander bumbers and trims are very grey and I would like to get them back to black.

I have tried Black Trim Wax and it looked good but as soon as it rained it all come off (3 hours of my life wasted)...

Someone suggested Boiled linseed oil, so I tried that but it just made the bumbers shiny and not black.

Has anyone tried Shoe Scuff Cover??

Any ideas anyone??
Click to expand...


*snigger*
 
I used a cheap Simoniz bumper black. Comes in a bottle and I poor it into a small bucket and apply it thickly & gloopy with a paint brush everytime I wash the car. With a brush it takes about 5 minutes to do. The first few times you will get streaks in it when it rains but after a few coatings the dye is buried into the plastic.

A warning though, applying it so thickly watch you don't rub up against the bumpers (it will leave a black mark on you, even when dry). Now my bumpers always look brand new and I just top it up every couple of months. It's also like vandal paint in asda car park, see people who have parked too close to you slide their arse along your bumper to squeeze in and they have a black smear. Love it.

Also once you have the desired dye level, any old silicone spray such as an autoglym plastic spray will keep them looking tip top, and form a barrier over them meaning they only need rinsing with a hose when dirty.
 
You must log in or register to reply here.

Similar threads

W
Freelander 2 2008 starting issue
Replies
12
Views
689
Arctic2
Arctic2
S
Freelander 2 (LR2) Any advice for my odd MAF symptoms
Replies
6
Views
754
Freddie17
Freddie17
F
£300 Freelander project! ... my first ever Land Rover
2 3
Replies
44
Views
4K
pwood999
pwood999
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
457
xDParis64
xDParis64
F
My 2006 Freelander TD4 Commerical
Replies
8
Views
696
Andy Warren
Andy Warren
Back
Top