Rosland
New Member
- Posts
- 4
- Location
- Clapham Yorks
have bought a 2004 v6 Freelander which is fine but getting ancient and need comfier front seat. Can anyone suggest what I can fit? Non electric at present. Cheers
Freelander 1
- Thread starter Rosland
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Skinny Mike
Well-Known Member
- Posts
- 2,910
You could buy the various sponge parts off Rimmerbros and get it redone or have a go yourself.
Mike
Mike
Rosland
New Member
- Posts
- 4
- Location
- Clapham Yorks
Thanks for responding. Guess I'll have to live with them as they are. Sides stick into me a bit. Need to slim perhaps!!!You'll struggle to find better seats that actually fit. Freelander's are know for how good there seats are. 2004 isn't that old for a Freelander. There's many about that are much older than that.
Skinny Mike
Well-Known Member
- Posts
- 2,910
I thought the Facelift V6 only came in HSE spec. Did they do another?
Mike
I'm not sure actually Mike. The HSE seats are far from uncomfortable though. I'd have and HSE myself if I could afford it.
I reckon the Freelander seats are very closely related to the Rover 200‘s - and there the Rover 25 and MG ZR. At leat, that’s what my back tells me: the back rest on my Pre-facelift FL1 has the same feel as our Rover 214SLi from the 1990s.
The ZR has much better seats IMO. BUT I really no idea how the seat bases differ...
The ZR has much better seats IMO. BUT I really no idea how the seat bases differ...
GrumpyGel
Well-Known Member
- Posts
- 26,393
- Location
- Christchurch, New Zealand
If the passenger seat is in better condition (they usually are), you could swap the cover & pads over between the passenger and drivers seats. They are slightly different but fit well, the only visible sign that they've been changed is 2 screw holes visible on each cover next top the hand brake.
Alternatively, get a matching drivers seat cover/pads from a breakers. They usually are not in the best condition though, or already sold - so you can get a passenger one from a breakers - as said though - you'll end up with 2 visible screw holes. You can cut material from old seat to slot behind so that the holes are not so visible.
There's some discussion on the What have you done thread from here...
https://www.landyzone.co.uk/land-ro...freelander-today.199594/page-340#post-3827775
Alternatively, get a matching drivers seat cover/pads from a breakers. They usually are not in the best condition though, or already sold - so you can get a passenger one from a breakers - as said though - you'll end up with 2 visible screw holes. You can cut material from old seat to slot behind so that the holes are not so visible.
There's some discussion on the What have you done thread from here...
https://www.landyzone.co.uk/land-ro...freelander-today.199594/page-340#post-3827775
Rich in Vancouver
Well-Known Member
- Posts
- 395
- Location
- Near Vancouver Canada
MyV6 isn't an HSE but I find the seats have great support. Mine has adjustable lumbar support which really makes a difference
- Posts
- 955
- Location
- Shetland
Pre-facelift Freelander 1s have different seats to the post-facelift ones. They are flatter as they don't have the side bolsters like the ones in your car. The leather ones wear very well so you could find an older car to get the seats from like I did:
Rosland
New Member
- Posts
- 4
- Location
- Clapham Yorks
Thanks for that
