freelander 1
- Thread starter chris1505
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
crowelander98
New Member
- Posts
- 36
- Location
- Scottish Borders
probably just needs reset, theres a procedure on here for that, just search for it. didnt work on mine but after i'd ****ed around with it i discovered that the motor had been replaced and polarity connected wrong, i just swapped + and - over, re set and its worked ever since! minor problem - brace yourself
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
recalibration is fairly simple, make sure you have radio code
disconnect battery, wait 10 mins, reconnect battery
tailgate window will lower all the way
turn ignition on, raise window using switch all the way to top
will bleep to confirm calibrated, job done
disconnect battery, wait 10 mins, reconnect battery
tailgate window will lower all the way
turn ignition on, raise window using switch all the way to top
will bleep to confirm calibrated, job done
halfstonedcowboy
New Member
- Posts
- 5
any ideas how to fix a tailgate window gremlin? fitted after market cables and i think they are maybe either a bit long or a bit short .resulting in the window working sometimes from the switch on the dash ,sometimes the car wont start possibly imobilised ,had a well known garage look at it which cost £40 to work once and get a load of cable ties hidden in the door cavity for the stuff they had cocked up
:-(...
:-(...
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
first of all is your window reaching the top if it is not it will just come back down also to not when doing it on the switch if you are rolling it up and stop it will just go back down to the bottom you have to stop it on the downward stroke.
Similar threads
