Freelander 1 wont start after cutting out

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

matt0795

New Member
Posts
13
Good evening all,

Looking for a bit of help....my freebie 1 cut out and would not start when static at some traffic lights. On calling recovery the guy plugged in his computer and it returned a catalytic converter fault (the cat and mid section is less that 6 months old) He did mention that it could be a false reading and was potentially the fuel pump.

I have replaced the fuel pump today and still no joy....it can be heard kicking in on the turn of the key.

the car is a x reg 1.8 gs I get all lights as normal on start up but no ignition, I'm thinking maybe ignition problems however I'm unsure and to be honest I'm not very mechanically minded.

Any suggestion or pointers would be greatly appreciated....and yes matches and petrol are at the ready lol!!!
 
"...would not start..." Was the vehicle running satisfactorily [normally] prior to this?
Does the engine turn over when you turn the key to start?

I'm not familiar with your registration system. Does X reg mean it's a earlier model between 2000 & 2001. If it is then I'd guess the motor has a distributor on the right hand end [ passenger side].

The failure to start could be a number of things including a faulty Cat' converter. Being only six months old doest mean it can't be faulty. Cat' converters can be damaged by motors which are worn [ burning oil / smokey] or have faulty ignition systems. Has your vehicle covered a high milage / is the motor worn [burning oil - smokey exhaust]?

Have the spark plugs and leads checked? Distributor cap and rotor inside it in good condition? Coil lead connected and in good condition?

Exhaust emissions are checked as part of your MOT. Were any problem/s indicated in the last test you had? These could point to over fuelling - poss a faulty O2 sensor or engine / air temp sensor... Over fuelling can damage / destroy a cat' converter.

There is also a crank position sensor which could be faulty. This would stop a motor too.

Have someone look at these things to see if there's a problem.
 
Thanks for the reply....yep car was fine with no issues before this.

I will have somebody look in to this tomorrow.
 
Cheers for the suggestions guys, I have checked the switch as freelance suggests that's fine.
starter motor turns as it should.

Got a guy out tomorrow to see what the score is.
 
and he kept on turning the motor over with a broken cam belt I would sue he should know better I bet a few valves have dug into the pistons and so on.
 
teddywood1 said:
and he kept on turning the motor over with a broken cam belt I would sue he should know better I bet a few valves have dug into the pistons and so on.
Click to expand...

In reality Teddy, the damage was done when the belt initially broke. Additional cranking generally does no more damage. Especially as a short crank is all that is required to determine a broken belt.
 
teddywood1 said:
and he kept on turning the motor over with a broken cam belt I would sue he should know better I bet a few valves have dug into the pistons and so on.
Click to expand...

Yep....was talking this through with my mate who came to look at it today. Considering I had to show the Green flag operator where the plug was for the diagnostic, he didn't really fill me with confidence anyway.
 
I am a mechanicby trade and I drive a recovery truck, I get called out to such a wide array of vehicles over the course of a year.... I can't remember where to find every diagnostic socket....

I drive a freelander and I dont even know where to find the socket on one! So just cuz he didn't know where to find the socket doesn't mean diddly.

However - missing the distinct whizzing that a broken cambelt produces is inexcusable!
 
You must log in or register to reply here.

Similar threads

R
Freelander 1 Non start
Replies
9
Views
1K
Freddie17
Freddie17
19J
Landy will crank over but wont fire.
Replies
17
Views
841
Dippypud
Dippypud
torr_td4
2005 Freelander TD4 cutting out
Replies
2
Views
756
Freddie17
Freddie17
S
SORTED - Freelander 1 TD4, Cut out at speed not restart
Replies
13
Views
1K
Sly401
S
A
Freelander 1 WHITE smoke cutting out after few seconds starting
2
Replies
20
Views
2K
Ian M in France
Ian M in France
Back
Top