Freelander 1 Winch bracket

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nodge68 said:
I'd love the winch, though with a V6 there's no room :(
Click to expand...

It's designed for the Warrior Samurai 9500SD & the new version has the control box mounted to the side on top of the motor, I'm pretty certain that will fit below the bumper line of the V6 pre facelift, or is there something that sticks out in front of the mounting pads for your existing aluminium bumper support ?
 
matacaibo said:
It's designed for the Warrior Samurai 9500SD & the new version has the control box mounted to the side on top of the motor, I'm pretty certain that will fit below the bumper line of the V6 pre facelift, or is there something that sticks out in front of the mounting pads for your existing aluminium bumper support ?
Click to expand...

The pre facelift V6 bumper sticks out 50mm more than the pre facelift 4 cylinder bumper. There's a reason for that. The radiator is 50mm further forward to accommodate the engine!!
The AC condenser is mounted where your winch is.
The facelift bumper on the 4 cylinder Freelander is pretty empty, sadly not so with the V6.
I'll see if I can look out a picture.
 
Last edited:
Nodge68 said:
The pre facelift V6 bumper sticks out 50mm more than the pre facelift 4 cylinder bumper. There's a reason for that. The radiator is 50mm further forward to accommodate the engine!!
The AC condenser is mounted where your winch is.
The facelift bumper on the 4 cylinder Freelander is pretty empty, sadly not so with the V6.
I'll see if I can look out a picture.
Click to expand...
Yeah that would be great if you can, so even the V6 facelift bumper is pretty full then
 
matacaibo said:
Yeah that would be great if you can, so even the V6 facelift bumper is pretty full then
Click to expand...
I'll dig some pictures out.
Dimensionally the facelift bumper is exactly the same as the pre facelift V6 bumper. This ment LR only needed 1 front bumper for all engine types instead of the previous 2.
So yes even the facelift V6 front bumper is full of obstructions.
 
Last edited:
The things you see when you have got your gun !!
With Lincs Search & Rescue, tasked with transporting a 1.5 ton field gun to the Airfield Anarchy event at Newark. Track of gun was so wide that it ran over the wheel arches of the trailer....no problem winching it on with the trailer winch but getting it off was difficult........enter the winch equiped Freelander ;)




 
Last edited:
Went for a winching session today on a proper winching piste & am ready to declare this winch / bracket combination the dogs bollocks, can easilly recover a Freelander from any situation where its wheels are still at the bottom & roofrack at the top. Am really quite proud of this, it gives the Freelander an extra dimension to its already impressive resume, if only I could build a bedsit in the back....





















 
Well done. Another ad in LRO Magazine hopefully. Get it out to the masses who aren't on this forum but dream of fitting a winch to their Freelander.
This is great.Finally people can buy those elusive accessories that the main stream manufacturers have been too blind to produce.
 
RealBeale said:
Well done. Another ad in LRO Magazine hopefully. Get it out to the masses who aren't on this forum but dream of fitting a winch to their Freelander.
This is great.Finally people can buy those elusive accessories that the main stream manufacturers have been too blind to produce.
Click to expand...

Lol, thanks, they are on e-bay ;)
 
matacaibo said:
The design is modular, the two end pieces are seperate & are fixed in the same places as the Mantec front reciever hitch bracket, ie they have a piece that drops down to the strong point under the front which spreads the load & stops the whole thing from twisting if pulling at an angle vertically. The centre piece could be modified to accept any reasonable size winch, I used a short drum winch but I can see that a normal winch would have fitted just as well. The centre section could also be moved back at least 4 cms possibly more.
The price if its finished in Black powder coat will be around the 300 quids mark. That might sound a lot but its comparable to similarly designed Defender & Disco bumpers.
Click to expand...

Hey... is the option to buy and ship one of these still available?
I'm from Trinidad & Tobago.
 
Hi

I know im a year late but do you still have any of these for sale?

I am in desperate need for one of these and not having a lot of luck finding one on the internet.

Amazing product and looks fantastic, it is perfect for my volunteer job in north wales helping to recover the elderly and ambulances over the winter in bad conditions.

Thanks
 
mccartney789 said:
Hi

I know im a year late but do you still have any of these for sale?

I am in desperate need for one of these and not having a lot of luck finding one on the internet.

Amazing product and looks fantastic, it is perfect for my volunteer job in north wales helping to recover the elderly and ambulances over the winter in bad conditions.

Thanks
Click to expand...
Winching the elderly should prove interesting.......
:D
:D

Are you part of 4x4 Response?
 
Hi there

Know it's a year old post (since last post) - but I'm really interested in a winch mount for my L-series. Any news regards this? Thanks...
 
You must log in or register to reply here.

Similar threads

I
Freelander work lights
Replies
18
Views
4K
Nodge68
Nodge68
freelanderoig
freelander 1 td4 rattle
Replies
17
Views
2K
freelanderoig
freelanderoig
T
Wheels/Tyres, Hydro Winch, Axle, Canvas, All Sort
2
Replies
31
Views
4K
taazzukcb
T
M
Freelander 2 hesitation problem
Replies
12
Views
19K
Tigger Eeyore & Roo
Tigger Eeyore & Roo
B
2002 freelander td4 auto gearbox problem, please help!!
Replies
3
Views
5K
tacr2man
tacr2man
Back
Top