Freelander 1 drop links

Old diver · Oct 13, 2019

Replaced a drop link not too long ago and it sounds like it’s gone again. Anyone recommend a decent make of drop link. It’s a 2006 Freelander 1 TD4.

websun · Oct 13, 2019

I've found borg and beck to be alright.
Just avoiding britpart or allmakes should suffice

Nodge68 · Oct 13, 2019

websun said:
Just avoiding britpart or allmakes should suffice

Avoid cheap altogether. ****part are just that. Allmakes boots fail between MOTs too. I've used Delphi in the past, but only managed two MOTs with those.

Arctic2 · Oct 14, 2019

try one of these TRW, FAG, SKF, CORTECO, the first would be my choice TRW. I always add some extra grease into the joints before I fit any drop link, be it on the FL or R40
https://www.autodoc.co.uk/car-parts...er/freelander/freelander-ln/15429-2-0-td4-4x4

rob_bell · Oct 14, 2019

Bearmach drop links failed in just 18 months - Chinese rubber had perished. Now fitted Delphi parts, and so far, so good.

tonytherunner · Oct 14, 2019

This are what i run for for years,very good quality and rigidity ,the rod is 12 mm thick.
https://www.onlinecarparts.co.uk/mapco-2038366.html

Freelander 1 drop links

Old diver

Well-Known Member

websun

Active Member

Nodge68

Well-Known Member

Arctic2

Well-Known Member

rob_bell

Well-Known Member

tonytherunner

Active Member

Similar threads