Freelander 1 cruise control stop during drive.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ziki

Member
Posts
10
Hello Landers, I'm facing an issue with the cruise control system on my 2002 FL1, 2.5 V6 HSE automatic.

The cruise control system out of sudden stop working during driving and start work again after restarting the engine.

Does anyone got any idea at what i shall look for?
 
Hello,
Don't know if you have the brake light switches as well as I am having a td4 auto, but my cruise c. didn't work until I had changed the second one. Maybe yours is on the way out with first signs or a bad connection.
 
The CC will cancel for many different reasons. If the engine ECM detects a slight misfire, the CC will cancel. If the gearbox has a glitch, the CC will cancel. Even a misbehaving brake light switch will cause it.
There's lots to check I'm afraid, as everything connected to the CC must be functioning perfectly, or it'll cancel.
 
Hello,
Don't know if you have the brake light switches as well as I am having a td4 auto, but my cruise c. didn't work until I had changed the second one. Maybe yours is on the way out with first signs or a bad connection.
Nope! The CC lights just out of sudden dissappear and wont turn back untill restarting.
 
Hello,
Don't know if you have the brake light switches as well as I am having a td4 auto, but my cruise c. didn't work until I had changed the second one. Maybe yours is on the way out with first signs or a bad connection.
Nope! The CC lights just out of sudden dissappear and wont turn back untill restarting
The CC will cancel for many different reasons. If the engine ECM detects a slight misfire, the CC will cancel. If the gearbox has a glitch, the CC will cancel. Even a misbehaving brake light switch will cause it.
There's lots to check I'm afraid, as everything connected to the CC must be functioning perfectly, or it'll cancel.
Indeed. Maybe someone had very similar issue and can throw some light on it. Its also likely to think that something goes wrong with the electrical circuits that cause this...does anyone upgraded his fuse box with higher voltage than recommended on the manual book?
 
Back
Top