Disco 2 Found rust, best thing to do

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MJI

Well-Known Member
Posts
16,124
Location
Worcester
Top of inner wing underneath reservoir and abs thingy.

Was not there a few months ago.

What is best repair?
 
Is it just surface rust or holed?

If it doesn't need welding, good wire brush/flap disc then scrub some rust converter in with a short stiff brush. Prime, paint and waxoil/lanoguard etc
 
Is it just surface rust or holed?

If it doesn't need welding, good wire brush/flap disc then scrub some rust converter in with a short stiff brush. Prime, paint and waxoil/lanoguard etc
Not sure but will drop some rust converter in asap
 
Not sure but will drop some rust converter in asap
Give the whole area a tap with a small hammer or wide, blunt screwdriver first. If it sounds dead and there's delamination or holes appear you'll have to weld. Hopefully you get a decent ringing sound.

Rust converter needs overcoating ASAP
 
Give the whole area a tap with a small hammer or wide, blunt screwdriver first. If it sounds dead and there's delamination or holes appear you'll have to weld. Hopefully you get a decent ringing sound.

Rust converter needs overcoating ASAP
Only got some tools with me
 
Back
Top