Footwells

b20wnx · Feb 13, 2011

i have to admit i looked at the cost of a new wing when i was doing mine as it was a ball ache, and thought right i am just going to cut it off or pull it orf and get a new one, think my thinking scared the **** outta it has they came orf in the end.... lots of wd etc

UK_Akita · Feb 13, 2011

b20wnx said:
i have to admit i looked at the cost of a new wing when i was doing mine as it was a ball ache, and thought right i am just going to cut it off or pull it orf and get a new one, think my thinking scared the **** outta it has they came orf in the end.... lots of wd etc

Some one i have been talking to is now in to defenders, hes had enough with the series. He says he has 2 wings, doors, windows and stuff for me for FREE

, Just waiting for him to dig them out. Then i may just rip the sod off.

b20wnx · Feb 13, 2011

bluddy hell - where do you find all these mates from?? its only going to cost you about £10 for rebuild at this rate lol.......
did you see the bit about get together next sat at my place????

UK_Akita · Feb 13, 2011

Ha ha, all my mates claim to come give me a hand but do they come, do they F**K. I saw a defender on a guys fromt i pass often, caouple of days later he was taking the bulk head off. I stopped to chat and he offered them to me.

Whish it would cost a tenner.

Would love to make it over, im working Saturday and Sunday

My days off this week are today and Thursday, so its a toos up of working at the garage on Thursday for a few quid in the pocket or play with betty

Will PM you the link and number for the bloke in Barnsley.

b20wnx · Feb 13, 2011

its a shame all the blokes round here taking things off only want to sell for ridiculus prices.... however have got in with one bloke just up the road who is into offroading and has loads of lads round all the time, keep chatting away and getting advice from them, just waiting for the moment they all say lets get it up here in the garage and get it finished quickly lol lol lol lol

UK_Akita · Feb 27, 2011

Is THIS cheap and worth it, or can i get cheaper. And were from as paddocks dont seem to do them

TheKeymeister · Feb 27, 2011

No idea if that's cheap, but don't limit yourself, you can buy that sort of stuff anywhere, it's not exactly Land Rover specific.

nrgserv · Feb 27, 2011

depends if you want to take your wings off every other weekend.
personally i'd just refit with mild steel nuts bolts and washers, and make the captive nuts.

stuart4884 · Feb 28, 2011

Hi mate Im in shiny sheff ecclsefield branch
try googling WAPSIPURT LR Spares for the
wing bolts & spiro nuts dirt cheap
Cheers Stuart

welditup · Feb 28, 2011

hi best to use 6mm wire dont need to take bulk head off!!

instantsquid · Feb 28, 2011

welditup said:
hi best to use 6mm wire dont need to take bulk head off!!

6mm? You sure?

UK_Akita · Mar 7, 2011

nrgserv said:
depends if you want to take your wings off every other weekend.
personally i'd just refit with mild steel nuts bolts and washers, and make the captive nuts.

Having trouble with the old ones, so was going to buy new.

Right i'm ready for selling or weighing it in. Still stuck with 3 bolts on the wing going in to the bulk head. any ideas getting them out without taking a grinder to the wing then grinder to the bolts.

UK_Akita · Mar 7, 2011

Top is out and second one down is rounding off, No socket fits.

Bottom 2 are flat screw heads

rustyrhinos · Mar 7, 2011

Get a good pair of grabs and turn the whole lot - but by the washer if it rounds the head of the bolt off. Either that or make a slot to turn it by - either in the washer and knock that round (the likelyhood being that the bolt will come with it) or put a notch in the bolt so you end up with a head that you can turn with a screw driver.

Or can you get to the threaded part of the screw from the other side? Turn it with a pair of graps by the screw if so - just enough to free it off. Use WD40/Molcule13/etc before doing it

For the flat-head screws you could use an impact driver if you have access to one.

Have you tried whitworth sockets?

crashbox · Mar 7, 2011

Try squirting some diesel into it and leave overnight. Tap it sharply before trying to turn using pliers or molegrips. You may have to drill them out. I used my grinder on the bolts holding the engine cover on a Dodge 50 last year and made up a new captive nut system welded to a metal strip.

UK_Akita · Mar 7, 2011

Ok, so i got out of my cot and picked up my toys

and though. I'm putting in new footwells right, so proceded to cut out the old footwell to gain access

Anyway then the alarm sounded, time to collect daughter from school. I quickly grabbed a few shots and off i went.

b20wnx · Mar 7, 2011

its coming on mate, just keep at it, i not been doing too much with mine, more playing around than actual productive. i have spotted another series by me which might nip along and have a look, stick it in the back garden and leave it there a couple of years (or when i get mine done lol)

UK_Akita · Mar 7, 2011

b20wnx said:
its coming on mate, just keep at it, i not been doing too much with mine, more playing around than actual productive. i have spotted another series by me which might nip along and have a look, stick it in the back garden and leave it there a couple of years (or when i get mine done lol)

Was not a good start for me this morning, thats why i got ****ed off so easy. It also seems when ever i get chance to do owt, its ****ing it down. The last time i really did something on it was before the 27th of feb, lacking tools (even the basics like a jack) very limited on spanner and sockets so the more basic jobs tend send me over the edge. Most of the tools and stuff me and my dad used for both our landys are at his house, because he's putting the 2A back together slowly (due to his health). So they can't be in 2 places at once.

I'm getting there with the tools, been on the scrounge today and negotiating deals on things on local forums.

Heard there is a landy show over here in Sheffield this month if your interested (just up road from me as well). Its the first one i have heard of around here, just waiting for more details. Will keep you posted if your interested ?

b20wnx · Mar 9, 2011

yeah i be interested in that show, just pm me details and we can make arrangements to meet up, i know what you mean about the rain cold etc, i have managed to talk the other half into letting me paint some stuff in the kitchen as told her it needs to be at a certain tempreture lol.....
i am limited with tools but getting there slowly too, it will come eventually, hopefully before my funeral lol

UK_Akita · Mar 15, 2011

Got some more done today, Drivers wing is off

Just having problems getting the steering box off, to give us clear access to the whole footwell. With the trouble i have had with the bolts, that hold on the wing. I ended up buying a whole new set.

OOPPPS, going to need a new one of these, been wacking it with the hammer and its still not coming off. What is it i will be looking for to buy a new one ?

Buttons the landy guard cat

Footwells

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Member

New Member

New Member

Active Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Similar threads