Freelander 1 fog light captive nut

does anyone know a source for the captive nuts
as used for fitting the fog lights ?
i can't find one online that looks the same as the originals
( local LR parts department were no help )

is M4 the right size ?
( screws appear to be 4mm wide )

could i use this type ? ( in pic )


the ones i have on now are all rusted and deformed
2 be broken and won't hold the foglight in place
( have removed both lights 'till i can get this sorted ..
( 'n not enough room to fit conventional nuts n bolts

on the original ones .. the front and back are different widths
made so they fit properly into the plastic mouldings

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cheers for any help ...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Someone must know hd3 ?
I'm afraid I can't though.

that's cool

i'm going with one's as in pic
yet to purchase 'n try ..
just need to source the right length m4 screws
and wait for weather to warm up a tad

on the lr parts comp. only the screws were listed
`````````````````````````````````````````````````````````````````````````

just to say ..
refitted the fog lights just now
the replacement nuts worked fine
captive nuts are m4 [as in above pic]
new ss screws are no.8 [4mm] by 15mm
[self tapping type]
```````````````````````````````````````````````````````````

Good to hear you got it sorted, and always nice to see a thread with a conclusion that answers the question.