Disco 3 (LR3) Flickering light problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Co-Pang-Yang

Co-Pang-Yang

Well-Known Member
Posts
2,930
Location
Colchester, Essex
hi all.

I recently purchased a Disco 3 HSE off a friend of mine.

Last month he had a problem with it leaving him stranded after electric problem which turned out to be a faulty alternator.

Was duely replaced with a genuine LR alternator and all good.

But this weekend I noticed that the interior lights seem to pulse when parked with the engine running and the reverse lights do it also.

Battery light isn’t on and has no problem starting in the morning.

Just wondered if anyone has any suggestions on where to look or what problem I might have?

Cheers chris
 
Co-Pang-Yang said:
hi all.

I recently purchased a Disco 3 HSE off a friend of mine.

Last month he had a problem with it leaving him stranded after electric problem which turned out to be a faulty alternator.

Was duely replaced with a genuine LR alternator and all good.

But this weekend I noticed that the interior lights seem to pulse when parked with the engine running and the reverse lights do it also.

Battery light isn’t on and has no problem starting in the morning.

Just wondered if anyone has any suggestions on where to look or what problem I might have?

Cheers chris
Click to expand...
Think I'd get a multimeter to test the output when its running to check if the alt is giving out full voltage, You want atleast 13.8v to 14.4, above 14 being ideal.
And then you can see how much its surging. I take it its only the power surging and the engine is idling fine?
 
plus 1 what @Jamiegreen has said

there has also been reports where some new alternators have been faulty , should only fit a denso one

if an alternator has failed it can take the battery with it

would also ensure the alternator connections are nice and tight and at the battery and the earths

The alternator will output up to around 15.5 volts

with the engine running , out everything on, screen, etc and see if the pulsing stops

there is also a guide which u may find useful

http://www.disco4.com/forum/post1366423.html#1366423

does it still pulse when u raise the engine to 1,000 revs
 
Last edited:
just a thought , have u got leds fitted

is it only the interior and reversing lights that are pulsing

plus if it helps , ur HSE has a hidden menu, always best to use a multimeter for testing, it was just something i remembered for reference

https://www.disco3.co.uk/wiki/Hidden_Menu
 
Last edited:
Jamiegreen said:
Think I'd get a multimeter to test the output when its running to check if the alt is giving out full voltage, You want atleast 13.8v to 14.4, above 14 being ideal.
And then you can see how much its surging. I take it its only the power surging and the engine is idling fine?
Click to expand...

totally agree in what you’ve said , suprising how high these run at , when i start mine it’s around 15.5Vdc and then slowly drops over time
 
Co-Pang-Yang said:
However, turn the interior lights on and heaters up full wack and voltage drops to 13v
Click to expand...

hi mate

to me it sound like the new alternator has gone, if u raise the engine speed to 2000 revs what is it then

as from 14.5 volts it shouldn’t drop but maintain the voltage when u start loading it

however really need a multimeter onto the battery to test it 100%

if it has gone, the alternators to fit are only denso , cheap or recon for some reason don’t last , hopefully it hasn’t taken ur battery with it

assume u can’t hear any slip on the belt and is all ok

these alternators are controlled by an external controller and will run up to 15.5 volts

the other guys should be along to see what they also think ,

have u got a meter that does AC volts , if so plse, with the engine running put it across pos and neg posts of the battery and see what u get plse , many thks

plse let us know how u get on
 
Co-Pang-Yang said:
Tried it at 2k rpm and getting 12-12.5v
Click to expand...

yep, sounds very low to me , but u will know more when u get a meter onto the battery , giving a 100 % reading and not going through the system but at source

plus, plse and out of curiosity try the AC meter test across the battery posts with the engine running and see what readings u get plse , thks
 
Just chucked the volt meter across the battery and engine off was reading 12.6v.
Then engine running goes up to 14.8v.

No clue with electrics so is that more likely alternator or battery?

Can’t even see the alternator to try and test that direct
 
Co-Pang-Yang said:
Just chucked the volt meter across the battery and engine off was reading 12.6v.
Then engine running goes up to 14.8v.

No clue with electrics so is that more likely alternator or battery?

Can’t even see the alternator to try and test that direct
Click to expand...

that sound more like it , did u set ur meter to ac as well and tested across the posts with the engine running plse,

is it only the interior and reversing lights that flicker , my only thought them is if the previous alternator failed could it have damage the led diode sensors

however , think the best course of action is to get the battery and alternator tested out by a garage first , in order that no damage can be done and be established battery and alternator are ok
 
Seems to be just interior lights and reverse. Though not checked the rest of the tail lights.

Yes I’ll have to take it to my mates garage at the weekend to try and figure out what’s going on
 
freelance said:
Probably battery is past it’s best, alternator seems to react how it should according to your figures
Click to expand...

read alot of reports where when the alternator fails it can also destroy the battery , but sometimes lucky if caught in time

i’m wondering if maybe with the previous alternator failing if it’s possibly damaged the diodes in the interior and reversing lights if there leds ???

alternator should output up to around 15.5 volts
 
Just to clarify that point all the interior and exterior bulbs are not led but standard spec.
Looking at the condition of some of them they look to be the original 14 year old bulbs.

I’m leaning towards battery as well but will try more investigating before chucking £100 at a new one.
 
Co-Pang-Yang said:
Just to clarify that point all the interior and exterior bulbs are not led but standard spec.
Looking at the condition of some of them they look to be the original 14 year old bulbs.

I’m leaning towards battery as well but will try more investigating before chucking £100 at a new one.
Click to expand...
Think halfords will test your battery with their tool if you take it to them, might be better telling them you think you need to buy a new battery and then just say you'll leave it once they've tested it. Worked for me before as they are so expensive I wouldn't get it from them.
And I think I'd avoid alternators from the breakers yard, I had mine from once and its starting to go after 6 months or so, well the regulator most likely, sometimes 12.2.. sometimes 14.4.. its a d2 though so the reg is built in to the alt, and they are cheap enough to buy as gary said, but obviously use the warranty if thats the case.
And if need be try and get a good branded battery, I spent £100 on a pos battery over here in Romania and the thing barely holds 12v, 11.4 in the cold.. -20. Guess it was sitting in the shop for a few years.
 
You must log in or register to reply here.

Similar threads

P
L322 Flickering rear lights
Replies
18
Views
681
Parkheadbhoy
P
J
Advise please, i have a td5 which i really enjoy having ( most of the time). Today my landrover stopped turning over and had no battery light.
Replies
4
Views
971
Jessica1986
J
B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Notmyrealname88
08 Range Rover All exterior lights flickering randomly
Replies
10
Views
2K
Mark Piercy
Mark Piercy
E
Hi, new owner of Freelander TD4
Replies
1
Views
466
WhiskyLassie
WhiskyLassie
Back
Top