Then it's fckd. Flashing LEDs is a classic bin it issue.
Flashing side light
- Thread starter Shepprice
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Shepprice
Member
- Posts
- 21
- Location
- South wales
All sorted change bulb works perfect
GrumpyGel
Well-Known Member
- Posts
- 26,386
- Location
- Christchurch, New Zealand
The side lights on our LDV V80 vans are LED and built into the head lamp unit and good for the life of the vehicle.
Which is why we keep having to change whole lamp units cos the side lights have failed. Frikin expensive side lights. Good earner for the manufacturer.
Which is why we keep having to change whole lamp units cos the side lights have failed. Frikin expensive side lights. Good earner for the manufacturer.
Shepprice
Member
- Posts
- 21
- Location
- South wales
Thanks for your help but it was the bulb
Does it pass the MOT with LEDs in there? My MOT garage now fail LEDs that aren't factory fitted, which they are entitled to do now.
J_D
Well-Known Member
- Posts
- 639
- Location
- Worcestershire
I thought it was the colour of the light being important, no blue tint. I have been told they hold white paper to them to check the colour.
Shepprice
Member
- Posts
- 21
- Location
- South wales
Yes mine passed the MOT with them in
My MOT garage are now checking "E" markings on the lamp assembly, and for LED bulbs fitted where filament bulbs should be.
I've put LED number plate lamps in my FL2, which came under some scrutiny, but as they're "E" marked, they pass them. If I'd put LED bulbs into the original lamp assemblies, they'd fail them, as retrofit LED bulbs aren't and can't be "E" marked.
My MOT garage is getting very hot on them now, so won't pass them. It's much the same for all the MOT garages round here now, so there's little point in trying somewhere else.
Similar threads
