Arctic2
Well-Known Member
- Posts
- 2,759
- Location
- Westmidlands
Hi navigator.
That is where I fitted my large O-ring that came with the kit
Freelander 1 FL1 55 plate starting!
- Thread starter Dartmoor Navigator
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi navigator.
That is where I fitted my large O-ring that came with the kit
Dartmoor Navigator
Well-Known Member
- Posts
- 5,899
- Location
- Dartmoor
Okay dokey, that's what I did. Thank you.
You can remove the regulator without taking the starter off, but it's bleddy fiddly.
What happens to the original bits of o ring, there was nothing inside?
And
It hasn't fixed the problem... I've had to replace the LPFP as that was failing to deliver enough fuel (engine management light started coming on) - I've also done the fuel filter and serviced the rest of the usual guff. I may have a set of injectors to borrow - but haven't done a leak back test yet.
You can remove the regulator without taking the starter off, but it's bleddy fiddly.
What happens to the original bits of o ring, there was nothing inside?
And
It hasn't fixed the problem... I've had to replace the LPFP as that was failing to deliver enough fuel (engine management light started coming on) - I've also done the fuel filter and serviced the rest of the usual guff. I may have a set of injectors to borrow - but haven't done a leak back test yet.
Lowbank
Active Member
- Posts
- 317
- Location
- Burnley, lancashire
seriously the o rings had actually GONE comletely. wow.
The bits of rubber could well be stuck in the injectors causing some of the issues, but never having stripped an injector, I am guessing.
Have you not noticed any improvement at all in any area of its running having replaced the o rings.
I have posted on another thread about the MAP sensor, cleaning that would not harm anything, but mine ran loads better after I cleaned it.
The bits of rubber could well be stuck in the injectors causing some of the issues, but never having stripped an injector, I am guessing.
Have you not noticed any improvement at all in any area of its running having replaced the o rings.
I have posted on another thread about the MAP sensor, cleaning that would not harm anything, but mine ran loads better after I cleaned it.
Dartmoor Navigator
Well-Known Member
- Posts
- 5,899
- Location
- Dartmoor
Thanks Lowbank. Much appreciated
Lowbank
Active Member
- Posts
- 317
- Location
- Burnley, lancashire
Oh just to add, when I cleaned the spare MAP I had I didnt push anything down the hole, just used brake cleaner. Having cleaned the one this morning for photos the other thread. against advice I did cut some matchstick down and very carefully used that, The hole geos a long way down the sensor and I know the first one I cleaned you could still see it was blocked so my cleaning effort was not very good but did improve its running.
I will refit the one I cleaned today if it stops raining and see if it makes any difference.
I will refit the one I cleaned today if it stops raining and see if it makes any difference.
Dartmoor Navigator
Well-Known Member
- Posts
- 5,899
- Location
- Dartmoor
Have you a link to the thread?
Arctic2
Well-Known Member
- Posts
- 2,759
- Location
- Westmidlands
Cleaning the map sensor is all part of the process of cleaning the manifold, and EGR if you still want to stick with the original EGR, some add a bypass EGR.
I change my manifold twice a year once in spring and once in Autumn which will be at the end of September, I carry spares of these due to our R40 meets etc,
It so happens I was doing an inventory of my spare sensors etc this morning pic 4 below
I change my manifold twice a year once in spring and once in Autumn which will be at the end of September, I carry spares of these due to our R40 meets etc,
It so happens I was doing an inventory of my spare sensors etc this morning pic 4 below
Attachments
Last edited:
