tacr2man
Well-Known Member
- Posts
- 3,926
- Location
- J10 M40 UK
Any one had any problems in stud /nut area when fitting a 8x16 modular steel onto a 110 front axle , the standard nuts will not go on far enough to use all the thread length in the nut ?
Fitting modulars to a 110
- Thread starter tacr2man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,235
- Location
- Embasinga stocæ
yu are using nuts for steel wheels - and not ones designed for alloys?
tacr2man
Well-Known Member
- Posts
- 3,926
- Location
- J10 M40 UK
Standard steel wheel type nuts not flat shoulder alloy nuts
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Ye could fit longer studs
When ah stuck me wolf rims on the studs sit just below the top of the nut and ah haven't had any problems... even been through two mot's
When ah stuck me wolf rims on the studs sit just below the top of the nut and ah haven't had any problems... even been through two mot's
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
I've had the same set of modulars on me 110, several discos and briefly on a series 3 and they fit em all without any problems.
