Fitting later bulkheads to 2A
- Thread starter jimsv8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
peter8315
Active Member
- Posts
- 724
- Location
- Ilkeston, derbyshire
Hi i fitted a defender bulkhead, truck cab and windscreen to a series three, had to chop the gearbox tunnel, but i have ended up with a gap above the doors, other than that its all the same
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
well that sounds like a recipe for ringing
just repair the original
just repair the original
peter8315
Active Member
- Posts
- 724
- Location
- Ilkeston, derbyshire
don't think so, the bulkhead mounting points are the same distance apart
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
the rest of your interior panels wont fit properly, tunnel, floors, pedal box is different, cylinder mountings etc
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
puma doesn't have vents either, and you'd have to weld in new hinges for the windscreen as they don't fold
samc88
Drivels spiritual representative
- Posts
- 2,838
- Location
- Anglesey, North Wales
Its probably less work getting a decent second hand bulkhead or repairing the one you've got than modifying a fender bulkhead 
- Posts
- 6,438
- Location
- North Perthshire
Its probably less work getting a decent second hand bulkhead or repairing the one you've got than modifying a fender bulkhead
Quite by chance : http://www.landyzone.co.uk/lz/f62/seriously-average-bulkhead-226390.html
:bolt:
samc88
Drivels spiritual representative
- Posts
- 2,838
- Location
- Anglesey, North Wales
