Fitting fog lights to a Freelander 54-plate - help please!

HI,

I'm a newbie to the forum, but was wondering if anyone can help.

I want to fit some fog lamps to my Freelander.

I've looked behind the spare switch space on the dashboard and noticed that there are wires there (presumably the loom is the same for all?), and have found the relay gap in the fuse box (The 15Amp fuse seems to be sitting waiting).

The problem is, I can't find where the wires run to out of the fuse box. I was wondering if anyone had any ideas on how I can find them. Is it likely that they are just sitting behind the bumper where they would normally go? (I haven't yet removed the bumpers and steering guard to investigate)

If anyone has done this, or similar and could assist I'd be greatly appreciative.

Many thanks for any assistance.

Chris

:welcome2:

The front fog light connectors (2 pin) will be taped to the front chassis legs when you remove the bumper.
Also look for an additional fuse position as i think they have separate fuses for each side.

Many thanks, I'm going to take her to bits on Monday!

Cheers, Chris