Fitting a Short engine td5

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

muddytrax

Active Member
Posts
129
Hi all I'm new on here but all the posts etc seem interesting, I have just bought a non running td5 commercial d2 at a reasonable price, the drawback a conrod has gone through the side of the block, previous owner had a brand new cylinder head so I guess all I need to do is fit a short block? anyone got any tips when doing this? have also thought about fitting an iveco engine? also does anyone know a good supplier for reckon blocks? would be grateful to hear from some of you!

Cheers

Adam
 
Pull the head first as the free piston may have damaged the head or valves thus writing it off as well.



Lynall
 
Thanks for the reply should have the head off tomorrow! Thinking of doing a 300tdi conversion but I'm unsure how I'm going to stop all the dash lights coming on!
 
If the td5 was a good engine that could be worked on easily I wouldn't but I'd rather put some hours in now putting a decent reliable engine in that's cheap to maintain this ones on its second td5 engine so there's got to be something wrong with them..
 
Have just taken the engine out! Not only was there a hole in the block it had cracked as far down as the sump! 4 pistons are ok though..
 
You must log in or register to reply here.

Similar threads

tilly2
Tillys smokey TD5, can we fix it ?
Replies
10
Views
969
tilly2
tilly2
S
LAND ROVER DISCOVERY 3.0L 306DT I WANT TO FIT A GEN 1 ENGINE INTO A GEN 2
Replies
1
Views
464
lynall
L
Maat
Disco 2 Can a TD5 engine be removed out of the engine bay without the cylinder head on?
Replies
8
Views
1K
Maat
Maat
T
td5 engine power loss
Replies
9
Views
850
Brown
Brown
C
Ingenium Low Compression | Engine Restore
Replies
2
Views
1K
lynall
L
Back
Top