First freelander issues

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Boombuddy1

New Member
Posts
7
Location
Peterborough
Afternoon all got my self a poor man’s disco so I had the issue of going into limp mode or no, but no boost mode going flat when I first brought it so I’ve replaced the air filter and it seems to have stopped but now I don’t really have much power, and when I get to sort of 3 1/2 thousand rpm I get black smoke would replacing the vacuum lines and the turbo inlet be a good start or am I looking in the wrong locations? FYI, I’m mechanically minded to a point where I can turn a spanner and use a ratchet.
Freelander 1 td4 2002
 
Last edited:
Afternoon all got my self a poor man’s disco so I had the issue of going into limp mode or no, but no boost mode going flat when I first brought it so I’ve replaced the air filter and it seems to have stopped but now I don’t really have much power, and when I get to sort of 3 1/2 thousand rpm I get black smoke would replacing the vacuum lines and the turbo inlet be a good start or am I looking in the wrong locations? FYI, I’m mechanically minded to a point where I can turn a spanner and use a ratchet.
Hey!

Which Freelander 1 or 2? What year and engine?
 
It looks old but no spilts put a new air filter in and now the issue has stopped just a new issue has come to light no limp mode just bit of black smoke and low on power
I would run some diesel treatment through. You may have possibly a clogged egr valve. Is the black smoke all the time or just when you accelerate
 
It looks old but no spilts put a new air filter in and now the issue has stopped just a new issue has come to light no limp mode just bit of black smoke and low on power
Check all 4 rubber boost hoses for damage, holes or splits.

Also replace all the vacuum hoses, replace the little turbo filter, and clean out the inlet manifold of the accumulated goop.
 
Back
Top