John FHA
Active Member
- Posts
- 300
- Location
- Cleveleys, Blackpool
finished welding my chassis for MOT
- Thread starter John FHA
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
matt1295
New Member
- Posts
- 1,734
- Location
- Scarborough
looking good mate
i can weld but not as good as that hats off to you
i can weld but not as good as that hats off to you
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
top job on that mate
- Posts
- 10,639
- Location
- Oxfordshire
bloody hell, the rest of it ok? Looks like a fair bit of rust. Good job on that part though
tired
New Member
- Posts
- 128
- Location
- essex suffolk
has it been in saltwater? Good luck with the test
John FHA
Active Member
- Posts
- 300
- Location
- Cleveleys, Blackpool
Cheers guys. Not sure if its been in salt water. But I had that thought as well. The car originated from Scotland so I think that corner was open to the elements. There is some little bits on the sill. I have knocked the hell out of the chassis. every thing else is ok. The welding I done is well more than Mr MOT guy said. Believe me if I can do this anyone can. Spent a couple of week practicing in the shed. If your intrested The welder I bought from Amazon. Wolf 130 amp. Gas/Gasless £130 New. Well happy with it. Also got gauntlets, pack of 2 £8 and auto darkening helmet which is ace. for £40. So for less than £200 Iv'e saved myself £150 off my mate doing it. Or £450 for the garage to do. No brainer really.
If you feel like having a go. Do it. If you find you can't you will always get your money back for your gear. I found It hard to do first few days. But when I got use to it and stopped being afraid of it that's when I started enjoying it.
JUST HAVE A GO GUYS. GOOD LUCK
If your intrested The welder I bought from Amazon. Wolf 130 amp. Gas/Gasless £130 New. Well happy with it. Also got gauntlets, pack of 2 £8 and auto darkening helmet which is ace. for £40. So for less than £200 Iv'e saved myself £150 off my mate doing it. Or £450 for the garage to do. No brainer really.
If you feel like having a go. Do it. If you find you can't you will always get your money back for your gear. I found It hard to do first few days. But when I got use to it and stopped being afraid of it that's when I started enjoying it.
JUST HAVE A GO GUYS. GOOD LUCK
You're a better man than I am, took me over 20 years off and on and I still aint mastered welding yet
John FHA
Active Member
- Posts
- 300
- Location
- Cleveleys, Blackpool
I wouldn't say mastered, far from it. All I can do is Find the good metal cut out the bad. Make sure there's good penetration on the welds and then frap wheel the spatter off. I'm a floor layer and it's not that much different to welding up safety floor. Not sure that helps me. But hey ho. I'm far from a great welder. Took me hours to do cleaning cutting shaping and welding. Where as a good welder could have done it in less that half the time I suppose.
discodave71
New Member
- Posts
- 102
- Location
- nottingham
hats off to ya fella, looks a good strong weld that...As for the rot in the first place. i thought i had problems...
Cliff4WD
Active Member
- Posts
- 177
- Location
- E Sussex, UK
Fack me, I've got nothing like the rust problem yours had and I was told to forget it and scrap and sell for parts! Well, I think I'll weld mine myself and get the girl back on the road. All hinges on you getting an MOT pass really doesn't it? Let us know.
John FHA
Active Member
- Posts
- 300
- Location
- Cleveleys, Blackpool
It will pass. ( No choice ) Just got to put new disc on back. so decided to do full brake replacement. new callipers disc and shoes all round. will do that next week. Gone busy at work now this week. Will let you know.
Don't sell it if your thinking of doing the work yourself. Garages can't be arsed so they tell it's too far gone where a good day welding and it's sorted. My mate who usually does my welding told me he couldn't really be bothered with it this year. so thought. If he can do it why not me.
Don't sell it if your thinking of doing the work yourself. Garages can't be arsed so they tell it's too far gone where a good day welding and it's sorted. My mate who usually does my welding told me he couldn't really be bothered with it this year. so thought. If he can do it why not me.
Last edited:
rowlesy
Member
- Posts
- 80
- Location
- midlands up unit
and garages will usually plate over unless you ask for them to cut out the rot so they'll be more holes next mot.....
John FHA
Active Member
- Posts
- 300
- Location
- Cleveleys, Blackpool
Well after a bit of time she finally went back for MOT. Didn't pass but to be fair only 2 small welds which I did see but forgot about and 2 bulbs. so should pass saturday.
GDM
Active Member
- Posts
- 205
- Location
- West Sussex
Are you using the welder in gasless mode with the flux cored wire?
John FHA
Active Member
- Posts
- 300
- Location
- Cleveleys, Blackpool
I was but then I ran out. Had a full roll of mig wire so I got some argon. welds a whole lot better. I will put some pics on of other welding tomorrow night. Also used a Wolf 140 amp mig welder I bought from amazon. Best £140 I ever spent Saved me 6 times that. Easy to work with aswell.
700Quid
Active Member
- Posts
- 341
- Location
- The Iceni Badlands
Great work mate.... just stripping mine and seeing yours has greatly encouraged me that mine is not bad at all :bounce: best of luck with next MOT...
John FHA
Active Member
- Posts
- 300
- Location
- Cleveleys, Blackpool
Well Took her in and after a bit more welding, she has now passed. He said my mates done some good welding. :jaw: Didn't tell him I done it. He might have took another look and failed it. So I just agreed.
Any way I would recommend anyone to have a go at welding. Guess I saved myself nearly £800
Whent a bit over the top with it tho. But thought it best to do as much as I can.
So for this MOT I welded chassis both sides front and back.
welded rear cross member
Put new disc, pads calipers and bearings all round. Oh bought myself a flaring tool for making up break pipe. so made a few of them aswell.
Welded front inner drivers sill. cut hole out in the floor so get to it and weld another piece of floor in. couple of light bulbs and that's it jobby done.
Any way I would recommend anyone to have a go at welding. Guess I saved myself nearly £800
Whent a bit over the top with it tho. But thought it best to do as much as I can.
So for this MOT I welded chassis both sides front and back.
welded rear cross member
Put new disc, pads calipers and bearings all round. Oh bought myself a flaring tool for making up break pipe. so made a few of them aswell.
Welded front inner drivers sill. cut hole out in the floor so get to it and weld another piece of floor in. couple of light bulbs and that's it jobby done.
