russtyzuk666
New Member
- Posts
- 12
Hi guys.. not really an issue but anyone have a problem filling up? no matter the position of the fuel nozzle it always clicks out.. takes an age to fill up..anyone else have the same problem? is there a fix for it?
filling with fuel click off action
- Thread starter russtyzuk666
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
OldIrishWulf
Well-Known Member
- Posts
- 3,974
- Location
- Great green Hibernia .
Your doing it wrong .
your not shoving it in all the way, are you?
freelandie71
Active Member
- Posts
- 313
- Location
- wirral
You only have to just put the nozzles in only just and fill as normal I haven't had any splash back yet.
Td4 2005 face lift model.
Td4 2005 face lift model.
Singvogel
Well-Known Member
- Posts
- 2,971
That's why there are little ridges on the underside of the nozzles - so you can have it inserted varying amounts, without it falling back out. 
S.
S.
JonFre
Active Member
- Posts
- 557
Its easy to have trouble at first. As suggested the answer is not insert it fully. Watch for a notch on the filler that works well when inserted that amount.
On our first Freelander, a V6, it took an age to fill until we got the hang of it.
Richard Martin
Well-Known Member
- Posts
- 1,371
- Location
- Cardiff
what they said ^^^^^^^^^^^^^^^^
I had the same problem when I first had mine
I had the same problem when I first had mine
Brack
Well-Known Member
- Posts
- 1,635
- Location
- North East
I always get it wrong with some clicks ...a little adjustment with the nozzle and then its fine every time -
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,046
- Location
- Gloucestercotshirewolds
Thank fook the solution has been found, I've been worrying myself sick
russtyzuk666
New Member
- Posts
- 12
Thanks guys... realise now was a stupid question... ill try harder to do it properly next time..
