FBH Question
- Thread starter rj75
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grayo
Active Member
- Posts
- 714
- Location
- Pontypridd, South Wales
There's lots about the FBH on the forum, but what I would do is set up a switch (like a key fob, can't think what's it's called) so that you can remotely turn it on and off from the house before you get in the car if needed.
Have a search there's loads about it there.
http://www.landyzone.co.uk/lz/f9/fbh-all-you-need-no-info-207133.html
Have a search there's loads about it there.
http://www.landyzone.co.uk/lz/f9/fbh-all-you-need-no-info-207133.html
Last edited:
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
you can buy the remote system for it but I would go with the positive feed wire and put a switch in that
http://www.landyzone.co.uk/lz/f9/how-i-repaired-modified-my-fbh-system-203702.html
page 3 has the details of the remote-start option I fitted.
page 3 has the details of the remote-start option I fitted.
Interupting the positive feed to the fbh will mean it wont be able to go through its proper shutting down sequence.
The combustion fan and water pump need to keep running to cool the fbh down after the burner has shut down.
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
wooops made a mistake again I think it is the old grey matter , I am glad I do not have a fbh on my new one ,the old one kept running all the time until I pulled the plug on the bottom of it .
Yes, that is like my problem except its on most off the time, and when out lampin you can garentee that the dam thing will start up just when you get a beed on a fox, the sound of somthing similer to a c130 going over head dont do much good in that area off my job. Where would i be able to get a new sensor ?
cheers
RJ75
Similar threads
