fault 4014 pump failure 3 sticking

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
darrenm said:
I seem to have brake problem.

I had a new alternator a few months ago I also replaced the brake pipes.

Every so often the? if I have had my foot on the brake the brake pedal goes hard. Had a few mins to have a look today and I'm also getting this fault code coming up fault 4014 pump failure 3 sticking.

Does anybody have any idea
Click to expand...


Yes, communicate in punctuated English and give us a chance to understand you and what the problem is. I've tried to turn your post into something clear but to be honest there's not enough there to work with.

People who can't be arsed to communicate clearly in English, don't deserve to be helped.


Dave
 
Last edited:
I wonder if you gave a little more information, you might get a better response?

Such as where did this code come from when using your Hawkeye - was it in the SLABS section, for example?
 
It's about the ABS return pump circuit, FL11, R10... or the worst, pump itself which is part of the modulator not replaceable..., sticking relay was subject of a technical bulletin long time ago... i answered on the Club;)
 
you better preventatively put a new relay instead of R10 though cos that intermittent sticking relay thing is well known and it can ruin the pump/modulator then it will be expensive
 
You must log in or register to reply here.

Similar threads

Z
Disco 4 (LR4) air bag
Replies
12
Views
1K
Zunni
Z
I
Fauls after reading with GAP IDD Tool - which one are 'real'?
Replies
19
Views
866
invisible999
I
K
Disco 2 ACE Fault
Replies
7
Views
545
kingy08
K
M
Timing chain noise 😔 2016 model. This is a fault on pre 2020 models on talking to numerous garages they are inundated with these repairs.
Replies
1
Views
837
Anaconda
A
L
FLICKERING BRAKE PAD WARNING LIGHT WHEN HANDBRAKE APPLIED??
Replies
11
Views
625
lrjohn
L
Back
Top