Farm jack or trolley

flat · Aug 20, 2014

I have had my 90 up on axle stands x 4 with no wheels on more than once. One was for about 6 mths and one was a whole weekend when I was Waxoyling

Seemed okay to me. I used 3 tonne rated ones and a high lift trolley jack on the diff to lift the front and back

james6546 · Aug 20, 2014

Does noone use the standard LR jack?

I just use that at the moment since my cheap farm jack decided to drop my chassis on my hand and I don't trust it. Its now still sitting at the side of my shed where I threw it.

Anyone used the flatdog farm jacks? Seem a good price...

flat · Aug 20, 2014

i use my standard jack if i am just taking a wheel off, rather than drag the trollety jack out etc

Paul D · Aug 20, 2014

With big tyres and lots of travel, why not make a check strap up so that it holds the axle? That way use a trolley jack (whatever) to only lift the vehicle as far as needed to take a wheel off.

I've used 4 axle stands on the 90 and Disco chassis rails .. once on it's pretty stable, it's the getting on evenly that's awkward. I've also used 4 metal ramps and it's again very stable once on.

I _do_ like the idea of the diff 'balancer' though, gonna look to make one of those for future use .. well, it's now on the list of projects tooling ..

easye1 · Aug 20, 2014

soon after buying my disco 1 I realised my normal trolley jacks dont lift high enough when the disco is on ramps.
I`m not short on equipement, got 3 trolley jacks, 2 & 1.2 sets of rated axle stands and 2 pairs of decent ramps, but, I them made the most bit of equipement I`ve used since disco ownership.

along with various wooden blocks used in various lifting and chocking, i made a superb trolley jacking block.
yes you can use it on "chuckies" even muddy ground as long as its not too deep, sand is ok too.
made from scaffold boards its 2foot long, 1 foot wide, and 7 inches tall.
looking from one end it resembles a T with scaffold boards cut to 2 foot long then screwed to each other with the jacking platform boards cut 12 inches long but screwed widthways to make up the 2 foot length..
yes its quite heavy but oh so safe.
I have smaller hight ones to put under the wheels if i dont want to get the ramps out which can be used with my bigger trolly jack under the lower shock mountings without the jacking platform, but horses for courses on the day...

Oh, I used the big platform plus bigger trolley jack plus 1 set of ramps on my LZinternational rescue job in my driveway a few weeks back..

SteNova · Aug 20, 2014

if lifting for wheels on work i drive onto 4 sleepers

easye1 · Aug 20, 2014

SteNova said:
if lifting for wheels on work i drive onto 4 sleepers

a good idea if you have the room....

but would be in the way on my drive and dam heavy to keep moving them..
but yes, a good idea

SteNova · Aug 20, 2014

easye1 said:
a good idea if you have the room....

but would be in the way on my drive and dam heavy to keep moving them..
but yes, a good idea

their not full size!! i took 1 and cut it into 4

Brown · Aug 20, 2014

Yes, I'm a fan of big blocks of wood for lifting vehicles. Sadly I don't have any to hand at the moment, but in the past I've used bits of floor joist, gatepost and railway sleeper. Nice and stable, plus they don't tend to dent the underside of the vehicle like metal stands. Even if they're not loadbearing, it's often reassuring to have one or two nearby under the vehicle when you're working just in case something should go wrong with the jack or stands, so you've got room to crawl out.

SteNova · Aug 20, 2014

+1 i don't like just jack or even stands, if i'm going under the car i'll chuck some wheels under it too so even if it falls i can get out

Paul D · Aug 20, 2014

SteNova said:
+1 i don't like just jack or even stands, if i'm going under the car i'll chuck some wheels under it too so even if it falls i can get out

Yeah, if I have a wheel off first place it goes is under the chassis rail if possible.

bluehaze · Aug 20, 2014

Not a fan of working under the wagon even when it's on stands - much prefer to have it on ramps. That said I'd like the Sealy 3 tonne high lift with axle bar for wheel changes.

TheQ · Aug 20, 2014

The only time I've had a car (Triumph 2000) fall of the jacks I was reaching under to remove the Axle stands. Luckily I still had the spare wheel under that side of the car as well.
These days I have plenty of sleepers and 4X4 beams which are used as a back up. Also for Propping up sailing boats.

robbh · Aug 20, 2014

Can never have too many things underneath holding me disco up.....

Columbus90 · Aug 21, 2014

Chr1s said:
I have one of these:

Sealey 1025HL 2.25tonne High Lift Super Rocket Lift Trolley Jack - Auto - Vehicle Products, Garage Equipment, Trolley Jacks

Both reasonably inexpensive and surprisingly good quality.

After looking for a hi-lift trolley jack that is very good value

Rorie said:
I have a driveway of chuckies and a garage which is too low to get the car in!

If anything, i thought the farm jacks would be better on a rougher surface.though obviously not the chuckies!

The chuckies on my old drive just stopped the trolley jack from rolling

Rorie said:
i found this farm jack.much cheaper than anywhere else..any ideas why?!

48" High Lift Ratchet / Farm Jack

Firstly it's half price so not that far off an average price for a hi-lift. My old one was a Jackal. I'll stick with that when I get a new one but there is quite a range of manufacturers now. Anyone know the load on a hi-lift at full lift??

the_wolf said:
Nope chuckie stanes are bigger

And sharper

Paul D said:
Yeah, if I have a wheel off first place it goes is under the chassis rail if possible.

Good idea

robbh said:
Can never have too many things underneath holding me disco up.....

I've got the same planter at our back door

Yoyodyne · Aug 21, 2014

Columbus90 said:
I've got the same planter at our back door

Funnily enough I have as well. A big one full of weeds round the back and a couple of smaller ones with carnations in by the front door :high5:

lurch915 · Aug 21, 2014

robbh said:
Can never have too many things underneath holding me disco up.....

Doesn't appear to be enough room to stretch out ! I do like to have a bit of a lie down

robbh · Aug 21, 2014

Columbus90 said:
I've got the same planter at our back door

It's usually in the way

I'm surprised i haven't broke it yet tbh

Yoyodyne said:
Funnily enough I have as well. A big one full of weeds round the back and a couple of smaller ones with carnations in by the front door :high5:

I have no idea what's in it plant wise....... My parents do all the gardening.

Although I do know there is a fair few rusty bolts in it.

lurch915 said:
Doesn't appear to be enough room to stretch out ! I do like to have a bit of a lie down

Looks can be deceiving, more than enough room for a good lie down under it.

Will be more room once the rear axle is off completely

Farm jack or trolley

flat

Well-Known Member

james6546

Well-Known Member

flat

Well-Known Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

easye1

Banned

SteNova

Well-Known Member

easye1

Banned

SteNova

Well-Known Member

Brown

Well-Known Member

SteNova

Well-Known Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

bluehaze

Well-Known Member

TheQ

Well-Known Member

robbh

Crazier than a box of frogs on acid

Columbus90

Member

Yoyodyne

Well-Known Member

lurch915

Active Member

robbh

Crazier than a box of frogs on acid

Similar threads