P38A Fan Belt Broke On M4

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
too late on the 2nd belt, but will buy several when & start assembly on the Autobiography. Then both cars will have spare belt in boot !!
 
martyuk said:
Dayco for sure... I managed to buy a genuine Dayco on eBay yesterday for £23... stocking up for my engine rebuild!
Click to expand...
Hi Martin, whats the reason for the new engine build?
PS, fitted the new screen connector to my HEVAC unit this week....works a treat! :)
 
martynv8 said:
Hi Martin, whats the reason for the new engine build?
PS, fitted the new screen connector to my HEVAC unit this week....works a treat! :)
Click to expand...

I'm glad the HEVAC is all sorted!

Engine rebuild... I've been meaning to 'refresh' it for the last few years since I bought it, as it feels a bit tired - but I saw that a couple of the core plugs on the block are leaking when I was under there doing some other jobs.... Decided to use the opportunity to rebuild myself a fresh engine to swap over, as I don't have the time to have this one off the road whilst I strip/rebuild the engine that's in it. A bit of an expensive undertaking, but overall it will be worth it, as I'm planning on keeping the vehicle for the foreseeable future!
 
martyuk said:
I'm glad the HEVAC is all sorted!

Engine rebuild... I've been meaning to 'refresh' it for the last few years since I bought it, as it feels a bit tired - but I saw that a couple of the core plugs on the block are leaking when I was under there doing some other jobs.... Decided to use the opportunity to rebuild myself a fresh engine to swap over, as I don't have the time to have this one off the road whilst I strip/rebuild the engine that's in it. A bit of an expensive undertaking, but overall it will be worth it, as I'm planning on keeping the vehicle for the foreseeable future!
Click to expand...
Good man!
You going standard with the engine. Hope you have better luck than me with the new engine. If i did mine again i would helicoil all the head threads & ARP the lot of them.
 
Mostly standard - top-hat short engine from V8 Developments, and then I have a spare set of heads which are being pressure checked/skimmed/valves relapped at a local engineering place. Putting a Piper Torquemax cam in to give it a bit more 'pep' in the lower rev range. Decided to go with ARP head studs - not that I'm planning on having to pull it apart again in a hurry though! New rockers, shafts, tappets (obviously with a new cam!), oil pump gears, water pump, flex plate, spark plugs etc.

I've already got Magnecor leads, and put new ignition coils on a couple of years ago. Will also use the opportunity to re-run my LPG pipework again and LPG injectors to try and get them fitted under the banana manifold. A fair whack of work to do - but should be worth it in the end! Then it's onto the other 2 P38's I have for restoration!
 
The other day I almost used the tensioner & fan belt from my project rebuild to get daily P38 back on the road, but backed out. Belt looks ok, but tensioner pulley a bit wobbly & past its best.

Anyways, received new items from Island4x4 today and now fitted & working. Also bought new accumulator, but thats gonna be another thread . . . would be wrong of me to hijack my own thread !! ;):p:Do_O
 
martyuk said:
Mostly standard - top-hat short engine from V8 Developments, and then I have a spare set of heads which are being pressure checked/skimmed/valves relapped at a local engineering place. Putting a Piper Torquemax cam in to give it a bit more 'pep' in the lower rev range. Decided to go with ARP head studs - not that I'm planning on having to pull it apart again in a hurry though! New rockers, shafts, tappets (obviously with a new cam!), oil pump gears, water pump, flex plate, spark plugs etc.

I've already got Magnecor leads, and put new ignition coils on a couple of years ago. Will also use the opportunity to re-run my LPG pipework again and LPG injectors to try and get them fitted under the banana manifold. A fair whack of work to do - but should be worth it in the end! Then it's onto the other 2 P38's I have for restoration!
Click to expand...

All sounds good. Going to pull my heads again when i get my spare set refurbed & putting ARP's in. Just getting fed up of having to replace head gaskets all the time & never been happy with the stretch bolts. I opted for the Kent 180 cam & 4.0 pistons.
Anyway.....going slightly off topic here ;)
 
martynv8 said:
All sounds good. Going to pull my heads again when i get my spare set refurbed & putting ARP's in. Just getting fed up of having to replace head gaskets all the time & never been happy with the stretch bolts. I opted for the Kent 180 cam & 4.0 pistons.
Anyway.....going slightly off topic here ;)
Click to expand...
You should consider studs and wing nuts.;):D
 
You must log in or register to reply here.

Similar threads

P38Seb
P38A Viscous fan woes
Replies
8
Views
790
kermit_rr
kermit_rr
J
2016 TDV6 Crankshaft Snapped
2 3 4
Replies
70
Views
4K
Mark Piercy
Mark Piercy
Inner Farmer
Series 3 Fan Belt Rattle?
Replies
7
Views
614
Anaconda
A
T
Fan Clutch??
Replies
14
Views
790
Grrrrrr
Grrrrrr
mad85
Disco 2 AC fan not kicking in
Replies
10
Views
356
sierrafery
sierrafery
Back
Top