Facelift Td5

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Open bonnet. Remove the three screws from the top of the grille, pull grille forward at top and lift away. Undo flap in plastic moulding at the bottom inner end of headlight, remove screw holding lamp unit to body. Remove two torx screws on top of headlight unit, pull headlight forward until mounting pin comes out of rubber grommet in edge of wing, unplug wiring multiplug. Unscrew cover behind faulty bulb, replace, reassemble everything. 5 minute job once you've done it once. Takes longer if you have an "A" bar as that's got to come off first!
 
bargepower said:
Open bonnet. Remove the three screws from the top of the grille, pull grille forward at top and lift away. Undo flap in plastic moulding at the bottom inner end of headlight, remove screw holding lamp unit to body. Remove two torx screws on top of headlight unit, pull headlight forward until mounting pin comes out of rubber grommet in edge of wing, unplug wiring multiplug. Unscrew cover behind faulty bulb, replace, reassemble everything. 5 minute job once you've done it once. Takes longer if you have an "A" bar as that's got to come off first!
Click to expand...

Its my first time on the Loony Zone for months and i find what im looking for right away,,, bloody good show. :clap2:
 
bargepower said:
Open bonnet. Remove the three screws from the top of the grille, pull grille forward at top and lift away. Undo flap in plastic moulding at the bottom inner end of headlight, remove screw holding lamp unit to body. Remove two torx screws on top of headlight unit, pull headlight forward until mounting pin comes out of rubber grommet in edge of wing, unplug wiring multiplug. Unscrew cover behind faulty bulb, replace, reassemble everything. 5 minute job once you've done it once. Takes longer if you have an "A" bar as that's got to come off first!
Click to expand...

Can anyone tell me what size the Torx bolts are please?
Regards
 
The torx headed screws secure the light mounting and dont need to be undone. The light unit is screwed through this with 2no pozy headed screws. A third pozy screw is fixed through a bracket to the slam panel on the inner lower cirner of each light.
Its in the manual !!.
 
Hello.

I need to replace both the screws and torx bolts along the top of a facelift headlight, as they are all very corroded and need to be drilled out. Screws need drilling out and one torx bolt sheered when trying to undo.

Does anyone know the size of these bolts and screws please. Thanks
 
1997 Discovery said:
Hello.

I need to replace both the screws and torx bolts along the top of a facelift headlight, as they are all very corroded and need to be drilled out. Screws need drilling out and one torx bolt sheered when trying to undo.

Does anyone know the size of these bolts and screws please. Thanks
Click to expand...

That sounds more like mine. :)
 
You must log in or register to reply here.

Similar threads

P
Disco2 TD5 Wich one
Replies
6
Views
659
MJI
MJI
R
D2 2004 BULBS
Replies
6
Views
571
tilly2
tilly2
D
Disco 2 Facelift D2, bonnet and bumper end cap
Replies
1
Views
407
Landmark2
Landmark2
D
D2 Oil pressure switch?
Replies
9
Views
931
Descapri
D
T
Ace problem !!
Replies
3
Views
282
sierrafery
sierrafery
Back
Top