facelift head ..decided to make some head light grills

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

adaptorman

New Member
Posts
143
Only had the motor on the road and some bas....d at 4.30 am tryed nicking them . Lucky dogs had a lump of his leg ..anyway .going get some steel bar and wrap it around headlights anyone any ideas as i dont wont the bar to get in way of the headlight beam patterns if possible ..as ive got a day free to knock somert up...
 
Bastards.....if you do a search in the stolen part of the main page you will find this is not uncommon. I have heard you can use some sort of steel straps. These headlights normaly end up on eBay so you'd be better off etching your number plate on the front of the lamps. This puts (SOME) people off buying them & hopefully stealing them. Good luck
 
or if you can afford put the pattern light guards, after you tighten the screws fill the holes above them with black epoxy then when necessary you can remove them quite easy by undoing the nuts of the holders under the bonnet. Google out STC53193, £44.69 the cheapest at Pa**ock
 
Last edited:
diy style 10 modified and fitted
2rgeyv6.jpg
 
Bastards.....if you do a search in the stolen part of the main page you will find this is not uncommon. I have heard you can use some sort of steel straps. These headlights normaly end up on eBay so you'd be better off etching your number plate on the front of the lamps. This puts (SOME) people off buying them & hopefully stealing them. Good luck
mice dotted and invisible details added too , if it helps them nicking them ,,oughts worth a try
 
few pms asking heres a pic , just made sure it wasn't affecting light patterns , not the best look , but stops them from been nicked (nothing worse then not sleeping)
2iha4wn.jpg
 
Cheers guys just a diy idea to stop thivies just ripping them out. Was going to powercoat them tbh ..but 2 silver lines.wouldnt right
 
Back
Top