Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
Well i wont be going anywhere as my alternator died yesterday 
Essex lanes
- Thread starter goonarmy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wickford90
Well-Known Member
- Posts
- 3,623
- Location
- wickford essex
Well i wont be going anywhere as my alternator died yesterday
I have a spare here, but don't know if TD5 and yours are the same.
James1966
Active Member
- Posts
- 158
- Location
- Sunny Essex
best way to check if you need an adj Panhard rod is measure axle posistion, is it in the middle of the chassis ? If it has been lifted then it may require one, just make sure you have used loads of threadlock on it have seen one come undone and then worn the threads and it came apart.
Mine is a defender with OME +2inch springs standard Panhard rod was OK and have fitted gen bushes, also have QT corrected arms, but only have +2 shocks. Do you have + 5 front shocks or lowerd turrets maybe extra travel seeing the bushes off ?
Mine is a defender with OME +2inch springs standard Panhard rod was OK and have fitted gen bushes, also have QT corrected arms, but only have +2 shocks. Do you have + 5 front shocks or lowerd turrets maybe extra travel seeing the bushes off ?
James1966
Active Member
- Posts
- 158
- Location
- Sunny Essex
take it off and soak it in a bucket of water for 5 minutes giving a spin from time to time might just be mud in the brushes, unless it has seized up ?Well i wont be going anywhere as my alternator died yesterday
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Discodad had lots of roles left over if i remember correctly??
danchapman2k2
Well-Known Member
- Posts
- 1,097
- Location
- Writtle, Essex
Discodad I need some shackles and strops if your selling
Discodad
Well-Known Member
- Posts
- 1,844
- Location
- East Anglia
I have lots of ropes left over from a failed group buy. They are open ended so will need splicing. Its easy to do, I self taught from Youtube.
I don't have any shackles.
Co-Pang-Yang
Well-Known Member
- Posts
- 2,930
- Location
- Colchester, Essex
Leaving Tolgate McDonalds at 08:00, main meeting point is the BP petrol station on Roxhall road in Chelmsford at 08:45
djguy
New Member
- Posts
- 347
- Location
- Witham, Essex
2" shocks & yes I have modified turrets on the front - so it could be them causing it
Well I been out all day in it & had no issues as of yet - I will slide under there tomorrow and check everything - I didn't use threadlock but if it comes undone I will be claiming on my 12month guarantee lol
)) Cheers for ya advice
)
Sorry for the lack of a reply, been recovering from tinnitus after driving to and from the alps
Yes it was me in the blue 90 who was in front of you. It would be good to tag along laning sometime, but i'm heading to plymouth tomorrow until early may, so i guess i'll have to wait until then.
Yes it was me in the blue 90 who was in front of you. It would be good to tag along laning sometime, but i'm heading to plymouth tomorrow until early may, so i guess i'll have to wait until then.
Drizz
Well-Known Member
- Posts
- 1,636
- Location
- Colchester
What were you driving to end up with tinnitus lol
Co-Pang-Yang
Well-Known Member
- Posts
- 2,930
- Location
- Colchester, Essex
Defender........
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
I've got a spare alternator.
beerdude
Active Member
- Posts
- 269
- Location
- Wickford Essex
Nah its dead, stinks and knocks as you turn it
Have you tried this lot?
Universal Rotating Electrics Ltd
Address: Unit 18-20, Pembroke Business Centre, Gardiners Lane South Postcode: SS14 3HY City/Town: Basildon (Essex)
Contact us: 01268 662210
I've used them before and they seem reasonable
I've never been laning before but would like to come along in the future if you people don't mind, I have been to pay and play at Bures and Chelmsford.
Kev
Last edited:
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
Exactly where i went mate
Old one was proper dead, rear bearing had collapsed and taken out the rotor so it was a paperweight. Got a refurbed one for £100 So now i am back up and running and with all this rain just in time lol.
Old one was proper dead, rear bearing had collapsed and taken out the rotor so it was a paperweight. Got a refurbed one for £100
So now i am back up and running and with all this rain just in time lol.
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
Could have brought a brand new one for not much more.
Similar threads
