Drizz
Well-Known Member
- Posts
- 1,636
- Location
- Colchester
I dont like people lol
Chassis is making me all moist:
Chassis is making me all moist:
Essex lanes
- Thread starter goonarmy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
- Posts
- 44,874
- Location
- Hornchurch
Anyone out the weekend? 90 will probbably be going back next week.
Discodad
Well-Known Member
- Posts
- 1,844
- Location
- East Anglia
Hoped to but I have a bearing welded to a stub axle.
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Joy of joys! Do you want my bearing puller?
Discodad
Well-Known Member
- Posts
- 1,844
- Location
- East Anglia
Does it match your torch
I'm going to try to cut some notches into it with my Dremel and then try hammer it off.
Failing that might have to have a go with a puller, but not a lot to get hold of.
Photos on page two:
http://www.landyzone.co.uk/lz/f7/rear-bearings-collapsed-now-half-shafts-stuck-195202-2.html
Oh and yes I've still got the steering box. Sorry been silly busy with work, building projects at home and getting the 110 road worthy. Give me a bell sometime and we'll sort it out.
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Does it match your torch
I'm going to try to cut some notches into it with my Dremel and then try hammer it off.
Failing that might have to have a go with a puller, but not a lot to get hold of.
Photos on page two:
http://www.landyzone.co.uk/lz/f7/rear-bearings-collapsed-now-half-shafts-stuck-195202-2.html
Oh and yes I've still got the steering box. Sorry been silly busy with work, building projects at home and getting the 110 road worthy. Give me a bell sometime and we'll sort it out.
Yeah, that's ####ed..... no way of getting a puller on that lol.
The last option would be to weld some lugs onto it and break out the slide hammer
I reckon go with the groove and a blunt cold chisel. Again, watch out for bits breaking off the chisel!
Drizz
Well-Known Member
- Posts
- 1,636
- Location
- Colchester
I'm clearing out all my defender/disco spares at mo, got 50 bits on eBay and loads more I haven't listed yet so if anyone needs any if it let me know!
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
Any Links?
Drizz
Well-Known Member
- Posts
- 1,636
- Location
- Colchester
Drizz
Well-Known Member
- Posts
- 1,636
- Location
- Colchester
Come on Mr T get some pics up
mikeyt
Active Member
- Posts
- 299
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Hi ho off to the sandblasters we go......
This is going to be interesting to watch?
Is it going to be a full over one?
Drizz
Well-Known Member
- Posts
- 1,636
- Location
- Colchester
Yes full external cage with cross brace inside
Drizz
Well-Known Member
- Posts
- 1,636
- Location
- Colchester
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Mmmmmmmmmmmm...............................
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Wondered if anyone was up for a little bank holiday laning as I can come again now as mine is all fixed and happy
Similar threads
