matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Essex lanes
- Thread starter goonarmy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Bloody flat tyre this morning 
Got to take it off the rim in a minute and clean it all up. No puncture or anything so I guess it is just dirt between the rim and tyre
Will have to grab a rim from the workshop tomorrow and put my other big BFG on it for a spare.
Got to take it off the rim in a minute and clean it all up. No puncture or anything so I guess it is just dirt between the rim and tyre
Will have to grab a rim from the workshop tomorrow and put my other big BFG on it for a spare.
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
Steering box is leaking where the input shaft enters it. PAS fluid dripping off my steering guard . Can you get the seal or is it a job of reconning the box?
. Can you get the seal or is it a job of reconning the box?
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
It is easy to do. Hard part can be getting the drop arm off.
Dan 81
New Member
- Posts
- 33
- Location
- Clacton on Sea, Essex
Hi Chaps, not sure whether this is still on for tomorrow but I cant make as something has come up.
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
wickford90
Well-Known Member
- Posts
- 3,623
- Location
- wickford essex
I hope so as i am still going
Me too. see you there.
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
This happened to one of our transits a while ago. Sadly the cctv showed a blank van whereas ours are sign written
harryrizla
New Member
- Posts
- 40
- Location
- chelmsford essex
done them shims
broke solid brake pipe that mounts to top of swivel bearing :doh:
cue 4 ish hours looking for some kind of brake fitting . . .
found a spare harley-d stainless pipe that just fit.
and on way home in the wee hours my full beam packs in.:doh:
dip still ok
fogs (wired to high) ok
high beam flash ok (with fogs)
but click to high beam and i gets SFA
reckoning its the stalk / switch.
RGB mondayt morning then.
broke solid brake pipe that mounts to top of swivel bearing :doh:
cue 4 ish hours looking for some kind of brake fitting . . .
found a spare harley-d stainless pipe that just fit.
and on way home in the wee hours my full beam packs in.:doh:
dip still ok
fogs (wired to high) ok
high beam flash ok (with fogs)
but click to high beam and i gets SFA
reckoning its the stalk / switch.
RGB mondayt morning then.
666 george
Well-Known Member
- Posts
- 1,535
- Location
- Essex
Have you put them on there own relay?
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
I have a spare stalk here you could try.
wickford90
Well-Known Member
- Posts
- 3,623
- Location
- wickford essex
Nice one today graham thanks for sorting the lanes makes a change to do some new ones
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
Yep enjoyed yesterday, thanks Graham. Done a couple of those before but most were new to me. Shame Violets wasnt that deep
The bit with the narrow track and 10 foot drop on the passenger side was 'interesting'
The bit with the narrow track and 10 foot drop on the passenger side was 'interesting'
666 george
Well-Known Member
- Posts
- 1,535
- Location
- Essex
Less said about that the better as everbody will want to do it.
Big Stu 12
Well-Known Member
- Posts
- 1,940
- Location
- Suffolk & Essex
Good you had some fun , better then we did with matts trailing arms.....
How deep was Violets,?? prob be a couple of months untill is very deep.
How deep was Violets,?? prob be a couple of months untill is very deep.
wickford90
Well-Known Member
- Posts
- 3,623
- Location
- wickford essex
no more than a couple of foot, and that was only in a few place's
Discodad
Well-Known Member
- Posts
- 1,844
- Location
- East Anglia
Debenham ford was dry by April last year. Hopefully a little more rain this spring....
Sounds like fun was had.
So the spots which were a couple of foot, how deep are they when the shallow bits are a couple of foot
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
I have 3 and half hours footage from yesterday and have condensed it down to around 30mins of the best bits. Will probably have to cut it up into 10 min chunks to get it on facebook or you tube without waiting 6 months for it to upload
For now some pics
For now some pics
Attachments
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Done some lovely lanes this evening but not in the usual mode of transport....... I took the horse lorry instead...... not down the lane but into the general area then got the horse out of the box then drove the horse down the lanes. Much easier getting a horse down the lanes than a wide disco Nearly knocked myself clean out on a low branch though
Oh, and with the horse, you don't have to stop to keep filling it up with diesel. BUT I'd rather the land rover as it has a heater!
Nearly knocked myself clean out on a low branch though Oh, and with the horse, you don't have to stop to keep filling it up with diesel. BUT I'd rather the land rover as it has a heater!
Similar threads
