Essex lanes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Getting there. Trucks now drives!!!
Both props are on, adjustable panrod arm on, steering arm on handbrake done, engine oil topped up, transfer box oil done, gearstick and trim back together, bonnet on and rear diff guard on.
Got the airbox to fit along with grill, bumper plus re-seal one dodgy wheel. Also gonna try and do the tracking using some chalk and a length of wood.
Then gotta change the tires on the caravan, wash it, Hoover it, tiger seal the windows back in lol and check the lights.
Oh and MOT the truck at some point.
 
Getting there. Trucks now drives!!!
Both props are on, adjustable panrod arm on, steering arm on handbrake done, engine oil topped up, transfer box oil done, gearstick and trim back together, bonnet on and rear diff guard on.
Got the airbox to fit along with grill, bumper plus re-seal one dodgy wheel. Also gonna try and do the tracking using some chalk and a length of wood.
Then gotta change the tires on the caravan, wash it, Hoover it, tiger seal the windows back in lol and check the lights.
Oh and MOT the truck at some point.

Sounds like your geting there Chris, all be done soon.

Hold on.... :eek:
I'm being left courier card messages on my Disco!!!:screaming_bug_eye_f
BTW Stu, it's still pretty dirty! :)

I was going to write "Please DONT wash me" in the mud, but most of it was on the floor, :p:p:p:D:D:D

Bet no one will park there now, :D:D


Anita is working Saturday Morning. I'll either bring both Sam and Emily or give it a miss this year. There will be other shows.

Hope you can make it Brian , see good to catch up with you again.
 
Got a new ball joint on rear anti rollbar today. New bolts to go on the panhard rod tomorrow as the others had the thread stripped the other week :(

Might try and get rear door chequer plated tomorrow depending on work!
 
Another disappointing end to the day.
Took the truck for a test drive and its all over the place. Pulling to the right and swerving left and right feels like its gonna roll over and that was at about 20mph. Tried adjusting the tracking but wasn't really getting anywhere so gave up and came home.
Also tried hooking up the caravan and the back end of it is pretty much dragging on the floor so looking less and less likely i'll be going to the show.
 
Another disappointing end to the day.
Took the truck for a test drive and its all over the place. Pulling to the right and swerving left and right feels like its gonna roll over and that was at about 20mph. Tried adjusting the tracking but wasn't really getting anywhere so gave up and came home.
Also tried hooking up the caravan and the back end of it is pretty much dragging on the floor so looking less and less likely i'll be going to the show.

That is bad news,
 
Bloody hell, not post for a couple of weeks and you end up with 20 pages to get through :D

Well mine is back on the road finally, got a replacement box but the input gear spline was shagged, got a replacement gear and ordered the wrong one :rolleyes: finally ordered the right one and all fitted :)

It even passed the MoT on Monday with only 4 advisories :D

If anyone wants a genuine 28 tooth input drive gear with brand new timkin bearings then let me know ;)
 
Bloody hell, not post for a couple of weeks and you end up with 20 pages to get through :D

Well mine is back on the road finally, got a replacement box but the input gear spline was shagged, got a replacement gear and ordered the wrong one :rolleyes: finally ordered the right one and all fitted :)

It even passed the MoT on Monday with only 4 advisories :D

If anyone wants a genuine 28 tooth input drive gear with brand new timkin bearings then let me know ;)

Good enws at last for you Tusken, you must visit the thread more, we have loads to say, lol.

Now your Discos working get yourself to the Suffolk 4x4 show and meet a few of us, lol, also a good run out for the Disco...
 
Back
Top