RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Old people like fishermen’s friends.
I don’t have any friends
I don’t have any friends
Engine won’t rotate by hand
- Thread starter P1Darbs
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P1Darbs
Member
- Posts
- 41
- Location
- Birmingham
don’t worry you haven’t lost me or scared me off, I’ve read all & will be flying back into Blighty tomorrow. I hear the weathers is good so I’ll be straight onto the RR & let y’all know what I find hopefully in real time
Hi buddy
Good to hear, ur find this a great forum with plenty of help
Safe trip and indeed Plse let us know how things go
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
you trying to make him suicidal ?And you have us
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
one of the things of progress is that companies want 'cheap'.. experience comes at a price.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Worthers originals humm i like those bugger i must be getting old ow wait i am
You're not old. Some of this lot are lucky if they go out with their pants on backwards ... Their neighbours are luckier still.
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
It was politicians that effectively stopped apprenticeships describing them as "outdated in the modern technological age". Companies were quick to realise that it was cheaper to employ already trained staff than do the training.
P1Darbs
Member
- Posts
- 41
- Location
- Birmingham
I’m also looking at the sump is this as straight forward as it looks from below already got starter out any advice whilst I stop for a cuppa would be great
Last edited:
raywin
Well-Known Member
- Posts
- 3,808
- Location
- North Yorkshire
Cant really help as I dont know this engine but keep up the photos and I am sure people will offer their knowledge
Thks for the update and got everything crossed for u mate
Indeed Plse keep the piccies coming
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
Re the sump. My tip is to take the oil out first before removing it.
Col
Col
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Personal experience?
raywin
Well-Known Member
- Posts
- 3,808
- Location
- North Yorkshire
If you leave it in and pull off the sump, someone may photograph you and that would ruin your chances of getting elected in Canada.
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
I always thought Canadians were sensible until the elected Trudy
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Yeah, bit odd that. I doubt Aladdin was white. If I go to a fancy-dress dressed as a dog with floppy ears and a tail I wouldn't expect a mob declaring me a canine-ist. let alone as part of an amatuer dramatics group 20 years ago when I was half out of my skull on alcohol. He should have turned around and just said: f*ck off you miserable c*nts.
mikieman
Well-Known Member
- Posts
- 332
- Location
- United States
People are just so sensitive...
To the point it’s almost bazaar...,
I like forums
But I don’t partake in social media
It’s the downfall
Of modern society
To the point it’s almost bazaar...,
I like forums
But I don’t partake in social media
It’s the downfall
Of modern society
Hello everyone
I am new on the LR side (before I ride an volvo XC90 and now an Ford Expedition)
But since my friend is buying an LR Dico 4 build in 2012 with SDV6 engine we also have some problems with that.
So I‘d like to discribe our problem and would be soooo happy, if someone could help with his experience:
Start…
Cylinderhead Cover bank 2 was broken so we dissassebleing and istalling 2 new once.
That was a good opportunity to also change the wasted hydros at the intake side
After assembling we learnes -> engine in not able to tourn over by hand (close to OT from booth sides)
We checked all cylinders and intake hole properly with a camera -> looking great
The blocking seems to be in the crankshaft, because we removed also the timing belt, set the camsafts to „free“
Engine is blocking furthermore matallicaly
Next…
We removed the front transmission gear and oil pan
No damage in the crankshaft, no visible blockings, no damage damage of shells
All looks fine… but engine is already blocking in the same position
Any Idea from the experts here?
Maybe P1Darbs did you have found something could help us?
Thx a lot and nice greets… Matthias
biketeacherdave
Well-Known Member
- Posts
- 4,885
- Location
- south east london
You should start your own new thread and not tag onto the end of an old 2019 post.
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
The SDV6 likes breaking cranks
thx datatek for answering…
Crankshaft looks ok. We dissasembled the oilpan, so that we have a proper look into the housing.
What I am wondering is, if we adjust zylinder 1 for OT and prepare the same at the camsaft side, normally I have to be able to turn the crankshaft over at least OT.
Following does happening:
Zylinder 1 goes over OT and the engine blocks when zylinder 1 is going to move down (about 2mm after OT)
Zylinder 4 comes near to OT and before reaching OT engine blocks…
I never have such a trouble in the past
Greetings Matthias
Similar threads
