Engine management light

Rasher61 · Nov 29, 2017

Hi people, need some help with engine management light . Diagnostics shows
1E00- CAN bus Other ECUs

Cheers
Rasher

Nodge68 · Nov 30, 2017

Rasher61 said:
Hi people, need some help with engine management light . Diagnostics shows
1E00- CAN bus Other ECUs

Cheers
Rasher

More information is needed.
What car, engine, year, gearbox type and anything else you think is relevant.

Rasher61 · Nov 30, 2017

Land rover Freelander s 2005 5 door manual. BMW Engine. Light came on after trying to open frozen back door, took it to garage for reset, seemed ok then it came on again. Parked it up, went out no light, then it came on again with the code shown above. Thats about it, no loss of power nothing else seems wrong.
Thanks for the interest.

Nodge68 · Dec 1, 2017

Ok. So it's showing a CAN fault. You need to start by checking every ECU connection is secure. CAN failure in the FL1 isn't very common. Prime candidates are the Ipack, Alarm ECU, ABS ECU, engine ECU and the CCU.

td4van · Dec 1, 2017

CAN only comes to a Td4 manual from ABS and Instrument Pack

I suspect this isn’t the reason why the EML is on and the code reader you’re using isn’t capable of pulling all the codes stored

Engine management light

Rasher61

New Member

Nodge68

Well-Known Member

Rasher61

New Member

Nodge68

Well-Known Member

td4van

Well-Known Member

Similar threads