Engine knocking under acceleration help please

C

crmalcolm

New Member

Posts

5

• Dec 23, 2013

• #21

doz said:

Catalytic Converter block has come loose inside the pipe.

Click to expand...

Thanks - so new down-pipe assembly required then?

 

doz

Active Member

Posts

615

Location

Southampton

• Dec 23, 2013

• #22

Yep well at least to shut the rattle up. It maybe still working okay. Problem is on the V8's the downpipes are all one piece. So your be doing both sides anyway. Also as it's one piece you will need to drop the gearbox cross member and I hope none of manifold studs snap. The drivers side manifold is a right arse to remove if it needs to come off to be drilled and tapped.

 

StuckAgainSteve

Well-Known Member

Posts

2,276

Location

London

• Dec 24, 2013

• #23

crmalcolm said:

Thanks - so new down-pipe assembly required then?

Click to expand...

Nope, drill a couple of small pilot holes in the casing either side, then screw in a couple of lengthy self-tappers until you feel resistance, that'll stop 'em rattling. Screwing cats will normally get you locked up - but not in this instance.

 

doz

Active Member

Posts

615

Location

Southampton

• Dec 24, 2013

• #24

How's that work come MOT time?

 

StuckAgainSteve

Well-Known Member

Posts

2,276

Location

London

• Dec 24, 2013

• #25

doz said:

How's that work come MOT time?

Click to expand...

Mine's gone through two MOTs like that! Didn't mention it! It shouldn't leak especially if you put a dab of exhaust paste on the threads - but I didn't need to.