No problem. I will hopefully have mine working next week. It’s one of the last jobs before the floors can go down and the internal rebuild work can start!
Electrical help please
- Thread starter t0m1980
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
No problem. I will hopefully have mine working next week. It’s one of the last jobs before the floors can go down and the internal rebuild work can start!
Once I get that plug in, my missus will stop moaning because the rear tub will be out of her way lol... I have just started to build a wiring loom, can’t be that hard.... can it
It isn’t that hard if you take your time and do it methodically. I didn’t build my current loom, but it is far from a standard 110 200tdi loom. It’s easy enough to do, just make sure you know what each wire is doing, or meant to be doing.
That’s the plan, I’m starting with the engine first so in theory I can turn the ignition and it starts, then work on all the additional bits, warning lights etc then finish with the actual lights.... I’m thinking the indicators and hazards will be the worst to work out if I’m being honest.
Wow that’s what I need to see, hopefully my plug will turn up today, I might even take tomorrow off to start some wiring, my TD5 dash turned up toso I be got a fair bit to be getting on with, I’ve also just picked up a load wire so no excuses I guess.
Best to block them holes up on the spare weather seals. I didn’t have mine fitted in the photo as the tank still needs refitting, but I have bigger issues at the minute.
