P38A Electric window not working. Where to start?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RobbyBobby said:
OKEY! None of my windows roll down! the whole Windows Consul is just dead! Thought about asking Bill Gates about it.
Even the Rear View Mirrors will not move or adjust!
Is there a 12v DC Supply that goes into the doors or a main fuse?
Seams as though a DC supply has been cut!
I cant seam to gather any info about possible Fuses or 12vDC Cable runs before I take off the dreaded "Door Cards etc.
I.e. "Suddenly it was all gowne"! No window movement etc at allez me old Arab!
Can anyone please help?!
Thank you all from Rob in deepest South Gloucestershire near Tim Fry if all else fails!
Click to expand...

Finding out where the fuses and relays hide is a good start - have you downloaded RAVE yet ?
 
RobbyBobby said:
OKEY! None of my windows roll down! the whole Windows Consul is just dead! Thought about asking Bill Gates about it.
Even the Rear View Mirrors will not move or adjust!
Is there a 12v DC Supply that goes into the doors or a main fuse?
Seams as though a DC supply has been cut!
I cant seam to gather any info about possible Fuses or 12vDC Cable runs before I take off the dreaded "Door Cards etc.
I.e. "Suddenly it was all gowne"! No window movement etc at allez me old Arab!
Can anyone please help?!
Thank you all from Rob in deepest South Gloucestershire near Tim Fry if all else fails!
Click to expand...
Start a new thread, you will get a better response. If it's all windows and both mirrors sounds like an earth fault as there is more than one fuse involved from memory. Download RAVE for the wiring diagrams.
 
Best to start your own thread. This one is >4 years old.

Wiring diagrams are all in RAVE . . . look in Technical Archive at top of forum. Nanocom can test the doors without the switchpack. Did it get wet from a leaky sunroof ?

Switch pack is F1. Front doors are F9 & F22. Rear windows are F12.
 
RobbyBobby said:
OKEY! None of my windows roll down! the whole Windows Consul is just dead! Thought about asking Bill Gates about it.
Even the Rear View Mirrors will not move or adjust!
Is there a 12v DC Supply that goes into the doors or a main fuse?
Seams as though a DC supply has been cut!
I cant seam to gather any info about possible Fuses or 12vDC Cable runs before I take off the dreaded "Door Cards etc.
I.e. "Suddenly it was all gowne"! No window movement etc at allez me old Arab!
Can anyone please help?!
Thank you all from Rob in deepest South Gloucestershire near Tim Fry if all else fails!
Click to expand...
Okay! You have guessed it! All the Windows etc have started working again. Thank you Bill Gates! Just threaten your Range with a Window Panel and Consul Strip and she will cure herself and start working again: I do not know why! I am just grateful to the Range Rover Gods/Murphey's Men etc! Rob.
 
You must log in or register to reply here.

Similar threads

A
Interior Lights & Electric Window Switch Failure??
Replies
3
Views
271
Arctic2
Arctic2
Montyjohn
P38A Passenger electric window not working
Replies
6
Views
1K
Datatek
Datatek
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
2K
TITCH SANDERS
TITCH SANDERS
S
P38 Electric pump head wrecker
Replies
9
Views
1K
Grrrrrr
Grrrrrr
F
Disco 2 Retrofit to get interior lights working
Replies
2
Views
347
sierrafery
sierrafery
Back
Top