EGR crap

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

landy-lee

Well-Known Member
Posts
706
Location
derby
so this weekend I'm getting rid of the EGR crap on my 300Tdi defender.

my first question is will i feel a difference? second is can i unplug the EGR box thing under the centre seat or does it need to be left plugged in so other gauges n thing work ect?

im also going to flush out my in let and intercooler.

cheers Landy-lee
 
so this weekend I'm getting rid of the EGR crap on my 300Tdi defender.

my first question is will i feel a difference? second is can i unplug the EGR box thing under the centre seat or does it need to be left plugged in so other gauges n thing work ect?

im also going to flush out my in let and intercooler.

cheers Landy-lee
If you just delete the EGR then probably not a lot, its cleaning all the crap out of the I/C and inlet manifold that makes the most change (depending upon how cruddy it is) as the engine can then breathe better. Getting rid of the EGR stops 99% of the build up reoccurring. I still have the ECU connected but that is because it is under the cubby box and out of the way, don't see any reason why you cant remove it.
 
Last edited:
When I did my 300Tdi D1, I noticed the difference, and then when I clean the IC out, t was better still. Both little jobs are well worth doing. :)

I then fitted a full width IC, and its way better :D

just put the wiring tidy, out of the way... it doesn't do anything else...
 
When I did my 300Tdi D1, I noticed the difference, and then when I clean the IC out, t was better still. Both little jobs are well worth doing. :)

I then fitted a full width IC, and its way better :D

just put the wiring tidy, out of the way... it doesn't do anything else...

what full width intercooler did you fit?
 
If your EGR is working correctly and you remove it, other than in your mind you will get no performance increase whatsoever. You will get less crap being produced in the inlet though.
 
What's the best way to clean the intercooler and inlet manifold?

Gunk and a dish washer.

unnamed-3.jpg
 
What was it like before the wash?
Here's my before and after. Not in the dishwasher though!
IMG_6222.JPG

IMG_6234.JPG

Mine was filthy inside, but had been blowing oil through.
 
Back
Top