egr blanking plate

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
paulypaul

paulypaul

New Member
Posts
173
Location
Norf Nor****
Hi, I have just fitted an egr blanking plate on my 2001 td5. can I just keep running the car as is, without replacing other bits as seen on several websites. I noticed that the instructions mention other pipework etc, can I just use the blanking plate without the need to renew/replace anything else and not do any harm to the engine.
Thanks Paul
 
Yes just keep running as is. All the blanking plate does is stop the gas passing through to the EGR system then back into the intake.
 
Disc300Series said:
Yes just keep running as is. All the blanking plate does is stop the gas passing through to the EGR system then back into the intake.
Click to expand...

Thats great, just didnt want to do any harm to the engine. Is there any benefit then to fitting all the other bits I have seen?
Thanks Paul
 
Not really, BUT if your car has dome a big mileage you might want top clean out the inlet manifold and the inlet ports of the head as they will be all gunged up by the filthy crap that the EGR creates.

We should run a competition for the most appropriate three words for which EGR is an acronym.

Entries on a postcard to Slob ...

CharlesY
 
CharlesY said:
Not really, BUT if your car has dome a big mileage you might want top clean out the inlet manifold and the inlet ports of the head as they will be all gunged up by the filthy crap that the EGR creates.

We should run a competition for the most appropriate three words for which EGR is an acronym.

Entries on a postcard to Slob ...

CharlesY
Click to expand...

Only done 68k, everything looked pretty good, didnt get covered in any muck whatsoever...must be a good sign!

As regards the three word acronym,,,what about "Engine gunge...REMOVE"
 
Hi
Im probably going to make a fool of myself by suggesting pluging the tube that opens the vac supply to the EGR keeping it closed???
be gentle with me
Russ
 
Yes thats the BB approach, it doesn't always work, EGR valve have a tendancy off jamming in the open position etc... The best way by far is to remove the lot, plate it, and put a straight through pipe in from the intercooler to the manifold, it also makes for cleaner air travel.
 
I read a lot about these when i start the disco i get these symptoms (egr symptims) but im not sure if i need one is it for td5 only? eg mine is a 2.5 - 93 k reg tdi disco can i fit one to mine?


Thanks Wappy.

ps sorry for jumping on the thread.. i couldent see the point in making another egr post lol
 
Before I take my new Disco to bits, has a blanking plate already been fitted with the egr left in place?
 

Attachments

  • DSCN6084.JPG
    DSCN6084.JPG
    22 KB · Views: 303
Hubbert said:
Before I take my new Disco to bits, has a blanking plate already been fitted with the egr left in place?
Click to expand...





not sure? by the photo, it looks like it has but the only way you can tell is to wip the two bolts out an have a good old nosey,
but get two new gaskets just incase;)
and if it has been done, wip the rest of the ****e off while your at it.
nick
 
You must log in or register to reply here.

Similar threads

D
EGR stuff
Replies
6
Views
817
sierrafery
sierrafery
bahteles
D2 Td5 - EGR Delete, should also remove vaccum solenoid?
Replies
4
Views
776
sierrafery
sierrafery
T
Egr
Replies
19
Views
1K
Arctic2
Arctic2
C
Intermitent power loss
Replies
0
Views
923
CThody
C
U
Disco 2 Egr blank, broke coolant hose?
Replies
4
Views
1K
Ush
U
Back
Top