Ecm

JohnnyCrash · Mar 21, 2014

Hi

My replacement ecm came today and when I went to fit it I found the Gate that holds the connector in place is a mirror image, so it will not fit?

JohnnyCrash · Mar 21, 2014

Bollox

Just noticed different part numbers :-(

What's the difference? ?

Thebest4x4byfar · Mar 21, 2014

Simply not the right one

JohnnyCrash · Mar 21, 2014

Thebest4x4byfar said:
Simply not the right one

Yea

Noticed when I posted as that's the first time they were next to each other

Its put the brakes on for today :-/

Thebest4x4byfar · Mar 21, 2014

JohnnyCrash said:
Yea

Noticed when I posted as that's the first time they were next to each other

Its put the brakes on for today :-/

Which is the right engine ecu number you need ?

JohnnyCrash · Mar 21, 2014

ERR 7112

If anyone has one shout up

Thebest4x4byfar · Mar 21, 2014

Will have a look when i'm home later as may have one. Keep you posted

JohnnyCrash · Mar 21, 2014

Thebest4x4byfar said:
Will have a look when i'm home later as may have one. Keep you posted

Thanks

wammers · Mar 21, 2014

Latest one here if you can't find one. It's a snip at the price.

Module - Engine Control - Eec Iv - Genuine Land Rover at www.rimmerbros.co.uk

JohnnyCrash · Mar 21, 2014

wammers said:
Latest one here if you can't find one. It's a snip at the price.

Module - Engine Control - Eec Iv - Genuine Land Rover at www.rimmerbros.co.uk

ordered 2 you never know when you need a spare

wammers · Mar 21, 2014

JohnnyCrash said:
ordered 2 you never know when you need a spare

Here's the new version of the ERR6114.

Module Assy - Ecu - Genuine Land Rover at www.rimmerbros.co.uk

Must be some serious components in the other one for a grand extra.

JohnnyCrash · Mar 21, 2014

wammers said:
Here's the new version of the ERR6114.

Module Assy - Ecu - Genuine Land Rover at www.rimmerbros.co.uk

think I'll look for a second hand one

wammers · Mar 21, 2014

JohnnyCrash said:
think I'll look for a second hand one

Might be the way to go. Where do they get their prices from?

JohnnyCrash · Mar 21, 2014

can I not just modify the connector on the loom to take the other ECM as I don't have the EGR connected??

or would this just be too simple??

Datatek · Mar 21, 2014

JohnnyCrash said:
can I not just modify the connector on the loom to take the other ECM as I don't have the EGR connected??

or would this just be too simple??

You would need to fit the IAT to the inlet manifold, and there are other wiring differences I think, I would need to do a side by side wiring comparison to be sure.

wammers · Mar 21, 2014

JohnnyCrash said:
can I not just modify the connector on the loom to take the other ECM as I don't have the EGR connected??

or would this just be too simple??

Maybe if you fit the earlier engine loom. But what a ball ache that would be.

Datatek · Mar 21, 2014

I hear the sound of someone digging

wammers · Mar 21, 2014

Datatek said:
I hear the sound of someone digging

No one digging at all. Don,t get paranoid. Just easier to get the correct unit than **** about changing a wiring loom and adding the temp sensor. The ECU expects to see certain things if it didn't see them it would get confused.

Datatek · Mar 21, 2014

wammers said:
No one digging at all. Don,t get paranoid. Just easier to get the correct unit than **** about changing a wiring loom and adding the temp sensor. The ECU expects to see certain things if it didn't see them it would get confused.

I agree, but Johnny seems intent on digging himself into more trouble.
Waste of time trying to fit the wrong EDC or change the loom. Whose paranoid?

wammers · Mar 21, 2014

Datatek said:
I agree, but Johnny seems intent on digging himself into more trouble.
Waste of time trying to fit the wrong EDC or change the loom. Whose paranoid?

Sorry Keith thought it was a reference to other things. Answer is possibly me.

Ecm

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

No longer with us, RIP

New Member

No longer with us, RIP

New Member

No longer with us, RIP

New Member

Well-Known Member

No longer with us, RIP

Well-Known Member

No longer with us, RIP

Well-Known Member

No longer with us, RIP

Similar threads