Series 3 ebay injun

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Priced about right for a rebuilt engine but I would personally have liked to have seen it running for that kind of money. Might still need fettling and money spent.
Two questions in my mind....Wonder how long it has been stood? If they did such a thorough rebuild, why was it not painted at that point.
 
I've been watching an engine on eBay that's in slightly worse external condition than that, but can't bring myself to take a chance on it. Too many questions that might not be fully answered.
 
If the pump works its worth half of that on its own.. If I went for it, it would have to have a full strip down anyway just to check everything.
Series enjins leak. They leak a lot. How the effin jeff do you get one that rusty unless its had no oil in it and its been stood in a field.

Oh and dont ask for it to be pelleted. The bits will be too small to put weld back together. :D
 
Might be reconditoned but looks like its not run in a few years, would need opening up to check it out for sure.
 
Core plugs on exhaust side look very corroded , I thought front timing case crank oil seal holder was normally refitted with screws after being replaced , this one has rivets in it.
Injector pipes look well corroded also.
 
X1 it looks like it's been stored out of a vehicle for a long time. Hose connections rusty. Alloy bits are corroded due to being exposed the air. I'd guess it's been in that shed for 10 years plus. As stated it's worth that price easily even if it needs further work. I'd seriously consider going for it.
 
failed mot on emissions - hopefully just a timing issue - but the bolt holding the ratchet thing on the chain tensioner sheared when I was putting it back together. bit of a pita but not in any rush to get it sorted. the idea of a quick smoke and leak free fix was enticing.
 
just thinking aloud here, can you strip an engine whilst it is in the car? seems to me its on a ready made bench - assuming the mounts are solid - and all round access should be fairly easy if the landy is sans front panel and wings
 
You must log in or register to reply here.

Similar threads

dag019
Capstan winch information required please
2
Replies
24
Views
3K
steve2286w
steve2286w
border
Headlights.
Replies
10
Views
1K
mystery
mystery
border
Bonnet Hinges
Replies
3
Views
823
border
border
GrumpyGel
Oily Tyres
Replies
6
Views
722
Andy Warren
Andy Warren
D
D2 new front prop shaft and grease question
Replies
4
Views
1K
Disco Magic
D
Back
Top