EAS Suspension problems

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

Colin from Hull

Active Member
Posts
299
Hi,
Ive been driving around on manually inflated airbags for months during this time I changed a front sensor which come up as a fault, so i thought today was the opportunity to go back onto my compressor. So i plugged in software and cleared my faults.
So no faults showing or bleeps on my dashboard now. But my car doesnt seem to want to move at all, lights showing on dashboard (Loading light on, Standard height light just flashing, compressors is runnning.
Thanks any help. Colin
 
It may very well be running. Is it producing and usable air, if it is where is it going, because it ain't going in the tank is it? No airy no worky. Read my "How to" check for output and check diaphragm valve for leaking.:)
 
Hi,
Yes ran out of daylight! Thats what im planning to do tomorrow, just thought i would put my problem out there, i will let you know how i get on. Thanks!
 
Have you waited for the system to fill fist before raising I take it its the one light ie the hight you selected wait with door open first.
 
Colin from Hull said:
Hi Thanks
Yes thats the one i have selected, why do i need a door open?
Click to expand...

Becuse your storage tank is empty and if you reset everything start car up and select hight with door closed its trying to fill the tank and ( try) to raise the car at the same time no chance .
By leaving the door open for five mins of so your tank will have enough pressure to raise the car :) it will freeze the eas system
 
Hi
Yes! that worked. Thanks
I was reading another thread and everyone seems to lock the suspension on Motorway height, i tried to select this height but it goes pass to the lowest setting, do i have lock this at 50 mph?
 
Colin from Hull said:
Hi
Yes! that worked. Thanks
I was reading another thread and everyone seems to lock the suspension on Motorway height, i tried to select this height but it goes pass to the lowest setting, do i have lock this at 50 mph?
Click to expand...

Keep the inhibitor switch pressed in it will only move one stage at a time :)
 
You must log in or register to reply here.

Similar threads

K
Is my RR Classic in EAS shutdown?
Replies
12
Views
855
kevleaper
K
M
Air suspension problems
2 3
Replies
59
Views
3K
Rubberknees
Rubberknees
M
Air suspension problems
Replies
1
Views
391
Datatek
Datatek
B
P38A P38A 1996 4.6 Auto HSE EAS slow to lower and rise + random height change to extended height + compressor running too frequently.
Replies
9
Views
1K
Datatek
Datatek
feyniriel
P38 EAS problems
Replies
18
Views
1K
pwood999
pwood999
Back
Top