I just been playing around with this free software which looks great, however I had some question for some of you that have already successfully used and cleared eas faults.
Firstly, I just get the EAS fault appear on my dash and the the height switch has all lights on solid. It is not on bumpstops, but at normal ride height.
I bought the cable from ebay and the usb adaptor too. Position switch to 2,and plug in cable, I hear a beep and then i "Initialize" get a sequence of tx which are FF and 1 and on the Rx I get FF and 0 almost alternate- is thi what I should be getting? or should the Rx be all FF?
Secondly I tested the relay in the fusebox no20, shorted across 2 terminals and I can hear the pump run ok.
I do get the software crashing a lot. Com port is 3.
Now I select the Read Fault, It comes back with a bunch of stuff which is saying valves and ports are stuck all the ports. Is this possible? It is telling me that the all the heights are locked or stuck , there are 2 or 4 hidden faults too.
Am I doing something wrong? Come on you clever people help me out here!
Its ****in it down right now but I need to get this sorted. I havn't fiddled with anything under the passenger seat yet- i cant get the frikening plastic clips out!
Firstly, I just get the EAS fault appear on my dash and the the height switch has all lights on solid. It is not on bumpstops, but at normal ride height.
I bought the cable from ebay and the usb adaptor too. Position switch to 2,and plug in cable, I hear a beep and then i "Initialize" get a sequence of tx which are FF and 1 and on the Rx I get FF and 0 almost alternate- is thi what I should be getting? or should the Rx be all FF?
Secondly I tested the relay in the fusebox no20, shorted across 2 terminals and I can hear the pump run ok.
I do get the software crashing a lot. Com port is 3.
Now I select the Read Fault, It comes back with a bunch of stuff which is saying valves and ports are stuck all the ports. Is this possible? It is telling me that the all the heights are locked or stuck , there are 2 or 4 hidden faults too.
Am I doing something wrong? Come on you clever people help me out here!
Its ****in it down right now but I need to get this sorted. I havn't fiddled with anything under the passenger seat yet- i cant get the frikening plastic clips out!
