L322 EAS Reset anybody?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hamster97

Hamster97

Active Member
Posts
517
Location
Manchester
Got a hard fault with my suspension after putting it in off road height to unload a car off the trailer, suspension went higher than I've ever seen an L322 and broke.
I've let the air out now but as it was a hard fault it's gonna need a reset. Is there anybody around the Manchester area with an EAS reset tool who could reset it for me so I can go to work tonight to make more money to be swallowed by the Range Rover.
I will obviously pay and come to you, any and all help greatly appreciated .

Thanks . 20161105_221029.jpg
 
Golly that's high. Have you visually checked height sensors to check they are still intact?
 
Hamster97 said:
Good call, no I haven't, are they known for pulling out?
Click to expand...

My front one snapped at the ball joint/ pivot point.

The rears, the plastic at the bottom where it mounts was seriously deteriorating/breaking up.

My money's on a height sensor if it's gone that high ....
 
I put it up that high in a way, I had nearly 2 tonnes of Audi on my trailer and lifted the suspension to off road setting, took the Audi off the trailer and Bobs ya mothers brother. 12" lift on an L322 lol.
 
Hamster97 said:
Anybody used one of these? Apparently can reset hard faults and other Range Rover wizardry .
Look at this on eBay http://www.ebay.co.uk/itm/222159245820
Click to expand...

I bought the CR plus http://www.ebay.co.uk/itm/iCarsoft-...770510?hash=item43bf81e78e:g:hLwAAOSwSdZWdDEZ

Earlier in the year for my Alfa. It works fine and I've used it on a few other cars no issues.
However, it's pretty vague on the RR I wouldn't get one specifically for the RR, you want/ need something more focused. I've got all comms and a hawkeye for RR. I'd go for all comms.
HTH
 
Hamster97 said:
I put it up that high in a way, I had nearly 2 tonnes of Audi on my trailer and lifted the suspension to off road setting, took the Audi off the trailer and Bobs ya mothers brother. 12" lift on an L322 lol.
Click to expand...

I wouldn't do it again! Your lucky it didn't blow a bag :eek:
 
Hamster97 said:
Got a hard fault with my suspension after putting it in off road height to unload a car off the trailer, suspension went higher than I've ever seen an L322 and broke.
I've let the air out now but as it was a hard fault it's gonna need a reset. Is there anybody around the Manchester area with an EAS reset tool who could reset it for me so I can go to work tonight to make more money to be swallowed by the Range Rover.
I will obviously pay and come to you, any and all help greatly appreciated .

Thanks . View attachment 110201
Click to expand...
shizers!! Did it see a mouse or something ??
5eli-mouse-color.jpg
 
The issue is simple.......

You had 2 tonnes on a trailer.....the rear suspension is compressed so the system pumped more pressure in to compensate and maintain the vehicle on the level......you then removed the weight, the extra pressure suddenly raised the rear end beyond normal travel.

With the doors closed and the engine running the system should have let the pressure out and releveled as necessary.

Or the transfer of weight on the trailer as the Audi rolled off lifted the back of the L322 up.....
 
Thats exactly what happened Mr Saint, engine wasn't running so extra pressure and no weight = 1/2 hour under the car letting air out of the air bags and £220 for the All Comms.
If I wanted an easy life I wouldn't have a range rover lol.
 
I'll let you know when it comes but update. . . . . . . I've got a mate with a Snap On Solus diagnostic machine and thought we'd have it a go, into the air suspension section, clear codes and done, back to normal.
Only cost me a tenner but I'm sure the AllComms will come in useful in some other way.
 

Attachments

  • 20161108_135232.jpg
    20161108_135232.jpg
    520.1 KB · Views: 324
Last edited:
Ye, definitely a follower and not a little job so left it tapping away for a bit. Don't really hear it inside with the windows shut so not annoying me too much. I'll get it done one weekend when I'm feeling brave.
 
Probably a summer job although I took the undertray, fan and ancillary belt off mine 3 times at the weekend to try and stop it squeaking and I found annoyance and frustration keep out the cold really well but the days are too short this time of year if you are working outside
 
You must log in or register to reply here.

Similar threads

B
P38A P38 EAS SOS
2
Replies
29
Views
1K
Mark Piercy
Mark Piercy
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
855
kevleaper
K
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
590
oldradiotech
O
p38DH
P38A Diagnostic device
Replies
8
Views
1K
p38DH
p38DH
Andy Warren
L322 Oil service reset
Replies
9
Views
1K
Rubberknees
Rubberknees
Back
Top