EAS Calibration Opinions Please
- Thread starter ericbeauchamp
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kevwill
Active Member
- Posts
- 930
- Location
- Sunny Hastings
Could be a number of things; possibly a sensor out of range & showing a fault. You would need to plug in diagnostics to check.
ericbeauchamp
New Member
- Posts
- 88
- Location
- Heathrow, West London
OK guys end to original post.
New bracket received & fitted.
No problems and at the moment, no EAS faults.
Sensor heights now all match.
See attached picture, one on left is incorrect one & one on right fits.
You can see the hole & stud positions.
Thanks for all suggestions & comments.
New bracket received & fitted.
No problems and at the moment, no EAS faults.
Sensor heights now all match.
See attached picture, one on left is incorrect one & one on right fits.
You can see the hole & stud positions.
Thanks for all suggestions & comments.
Attachments
- Posts
- 58,170
- Location
- Preston Lancs.
They sent you the wrong hand then.
ericbeauchamp
New Member
- Posts
- 88
- Location
- Heathrow, West London
@wammers
It appears so but the supplied cable was the correct one colour coded red for left side, green for right. Just the wrong bracket.
It appears so but the supplied cable was the correct one colour coded red for left side, green for right. Just the wrong bracket.
Similar threads
