biketeacherdave
Well-Known Member
- Posts
- 4,885
- Location
- south east london
Just gave his number to a mate after taking him for a spin in mine he was gobsmacked
Disco 2 dynachip
- Thread starter biketeacherdave
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Mike can't remap my ECU the week after next, so I'm going to take the chance that the Royal Mail delivers it on time to Mike and back to myself before Thursday.
For postal insurance, what should I put the price as?
Just finished packing the ECU... you'd think I was shipping a Fabergé egg!!
For postal insurance, what should I put the price as?
Just finished packing the ECU... you'd think I was shipping a Fabergé egg!!
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
How much will it cost to replace?
Cheers....
PS, I hope you get it back in time.
Cheers....
PS, I hope you get it back in time.
brian47
Well-Known Member
- Posts
- 8,867
If you want a working Disco2, then it's even more valuable than a Fabergé egg!Mike can't remap my ECU the week after next, so I'm going to take the chance that the Royal Mail delivers it on time to Mike and back to myself before Thursday.
For postal insurance, what should I put the price as?
Just finished packing the ECU... you'd think I was shipping a Fabergé egg!!
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
I reckon £500 would be enough to cover the replacement costs and any taxi fee's I have to pay if they do lose it.
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
OK, so Mike has done the remap and the ECU is on it's way back to me, but he's mentioned that the ECU lid has been removed at some point in the past, so I'm a little bit concerned now as to what someone has been been doing inside it.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
OK, so Mike has done the remap and the ECU is on it's way back to me, but he's mentioned that the ECU lid has been removed at some point in the past, so I'm a little bit concerned now as to what someone has been been doing inside it.
You may find it was just removed to check for oil contamination, if the red plug has been full in the past.
I would have thought if there was a major issue then Mike would have said so.
Cheers
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
I hope that's all it is. Mike didn't say anything else, so I'm assuming he was just making me aware.
SteveClv
Active Member
- Posts
- 145
- Location
- Sherborne, Dorset
Just to add a bit more juice to the thread - Mike did mine a while back and we backed down the wastegate actuator that a PO had wound in. Now it's adjusted back to about 11 threads and the wastegate actuator is all reconnected.
When towing the caravan up to Yorkshire and back I had the nanocom in instrument mode and monitored the boost pressure. It appears that the wastegate modulator is what is allowing the overboost condition (in my case up to 1.37 bar) so that it would seem that the actuator rod length is slightly irrelevant but that a working wastegate modulator is vital.
The new map from Mike seems to handle everything with ease and it was a pleasure to drive with the van on the back - more than enough grunt to handle overtaking with ease. It appears to have done between 24-25mpg when towing at 60mph - not bad considering the D2 was pretty loaded up too!
When towing the caravan up to Yorkshire and back I had the nanocom in instrument mode and monitored the boost pressure. It appears that the wastegate modulator is what is allowing the overboost condition (in my case up to 1.37 bar) so that it would seem that the actuator rod length is slightly irrelevant but that a working wastegate modulator is vital.
The new map from Mike seems to handle everything with ease and it was a pleasure to drive with the van on the back - more than enough grunt to handle overtaking with ease. It appears to have done between 24-25mpg when towing at 60mph - not bad considering the D2 was pretty loaded up too!
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Seriously if you havnt had this done do it !!!!!!
Mike 07802 200 026
Got my remapped ECU back and reinstalled it in the Disco. What can I say...???
I think biketeacherdave says it perfectly.
